Advertisement
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on the
front cover and pages 2 - 3.
3 - 4
Remove all fittings from the plastic
bags and separate them into their
groups.
Keep children and animals away
from the work area, small parts
could choke if swallowed.
Make sure you have enough space
to layout the parts before starting.
General care and maintenance
Only clean using a damp cloth and
mild detergent, do no use bleach or
abrasive cleaners.
Cleaning and care of solid wood surfaces
Cleaning and care of high gloss surfaces
Dust regularly with a clean dry
Regular dusting with a dry cloth will
cloth.
keep your units clean.
Wipe up any spills immediately
Clean marks with a damp cloth.
with a damp cloth and then dry
Do not allow spillages to stay on the
the surface with a clean dry
surface for long.
duster.
To remove stubborn stains, wipe
over with a damp cloth and washing
Repeat this procedure for periodic
up liquid.
cleaning
Do not use abrasive cleaners.
Do not clean with products
contaiing the following: Acetone,
General information
If for any reason you should have
problems with your Habitat product,
please contact the store from which
you purchased it.
2
1
Do not stand or put weight on the
product, this could cause damage.
Assemble the item as close to its
final position (in the same room) as
possible.
Do not place furniture directly in
front of radiators, fires or any other
source of heat.
Parts of the assembly
will be easier with 2
1
2
people.
From time to time check that there
are no loose screws on this unit.
The use of furniture polish or
(e.g nail varnish remover). Ammonia
spray is not necessary or
(e.g.bleach). or Sodium hydroxide
recommended.
(e.g. Caustic soda, drain and oven
Periodically re-oil with
Danish Furniture Oil.
Ensure the oil is dry before
using bed to ensure bedding
does not get marked.
Please retain your receipt as proof of
purchase.
If you have any comments or
suggestions regarding this product,
assembly instructions or service
Assemble on a soft level surface
to avoid damaging the unit or your
floor.
We do not
recommend the
use of power drill/
drivers for inserting
screws, as this could
damage the unit. Only use hand
screwdrivers.
Dispose of all packaging carefully
and responsibly.
This product should not be discarded
with household waste. Take to your
local authority waste disposal centre.
Important: Recomended
maximum load for bed
is shown below.
received, please contact the store or
Habitat Head Office via its web site:
www.habitat.co.uk
or write directly to: Habitat Retail Ltd.
489-499 Avebury Boulevard,
Milton Keynes MK9 2NW
Advertisement
