Subscribe to Our Youtube Channel
Related Manuals for Luma 700 Series
Summary of Contents for Luma 700 Series
- Page 1 700 Series Bullet 500 Series Bullet IP-Enabled HD Surveillance Camera Installation Manual...
-
Page 2: Required Equipment
Internet connectivity allows you to use OvrC, a powerful remote maintenance service. See OvrC.com for details. Safety Tips In addition, Internet connectivity allows your client to use the Luma Surveillance mobile app to check on the camera from anywhere. Handle this device with care. -
Page 3: Installation
Luma 500/700 Series Bullet IP Camera Luma 500/700 Series Bullet IP Camera Installation Overview Before you start, ensure that the device is in good condition and all the assembly parts are included. Also ensure Before installing, familiarize yourself with the parts of your camera. -
Page 4: Prepare For Installation
Luma 500/700 Series Bullet IP Camera Luma 500/700 Series Bullet IP Camera Prepare for Installation Weatherproofing the PoE Cable 1. Drill a cable hole and pilot holes for your screws in the mounting surface, ’ ‘ using the supplied template shown. The cable hole needs to be at least ... - Page 5 Luma 500/700 Series Bullet IP Camera Luma 500/700 Series Bullet IP Camera Install the Camera with an NVR Install the Camera with No Recorder 1. Route the cables through the cable hole. 1. Route the cables through the cable hole.
-
Page 6: Edit The Network Settings
If you are not using an NVR is your installation, continue setup using the following instructions. At the top of the right column of the Luma Utility, make a note of the IP address; Download and Install the Luma Utility you’ll need it in the next step. - Page 7 Restart your browser and return to your camera’s login window. Enter admin for both the user name and password. You might get a pop-up message that asks whether you want to run the Luma Web Components plug-in. You must allow the plug-in to access your system over the web.
-
Page 8: Adjust The Camera
The 700 series has a motorized varifocal lens. three hex screws in the camera. Check the camera’s aim using either the camera’s web-based UI, the Luma To adjust the focus, return to the live screen (see page 13) and click the PTZ icon . -
Page 9: Set Up Dynamic Dns
Luma 500/700 Series Bullet IP Camera Luma 500/700 Series Bullet IP Camera Set Up Dynamic DNS Set Up Port Forwarding DDNS allows you to connect to your surveillance system from anywhere, via the Internet, using a web address Port forwarding is typically found under the Applications & Gaming section of your router. Refer to your router’s that’s easy to remember. -
Page 10: Change The Admin Password
Luma 500/700 Series Bullet IP Camera Luma 500/700 Series Bullet IP Camera Create Users and Set Passwords Calibrate the Camera’s Clock Click on User Management. Click on System Settings > Time Settings. Change the Admin Password Synchronize the Time Click on the admin account, then click Modify. -
Page 11: Year Limited Warranty
3-Year Limited Warranty This Luma Surveillance™ product has a 3-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled.
Need help?
Do you have a question about the 700 Series and is the answer not in the manual?
Questions and answers