Advertisement
16
Press the 'YES' key until the screen displays:
Note: This function must be returned to disabled once the logging on sequence
has been completed.
17
Press the 'NO' key until the screen displays:
Note: After logging the device on to the system there will be two faults: -
st
1
fault is processor reset.
nd
2
fault is the Tamper.
TSD012
Figure 1
SIGNALPOINT I/O UNIT, ISSUE 1 – 09/09/13
6
| Slot is
:IN USE |
>Logon is DISABLED<
|\/\/\/\/\/\/\/\/\/\/\|
01 FAULT
TOT 02
Default Device 125
ZONE 01 DEVICE 125
Advertisement
