Advertisement
www.support4service.de
Valve Control 2a (VC2a), Rev. 1.3
Page 3 / 13
1. Hazard note
Faulty setting may lead to irreparable damage of the valves
connected.
Please note, that releasing the push button „Enable" in fact
shuts off the output, but does not reset the preset set point.
Thereby, with activating the push button „Enable" again, the
maximal set point can be switched to the valve connected !
The permissible deviation of the set current from the set point
is max. + 5%.
The feedback measuring accuracy is + 5%.
Advertisement
