mbot 3d Cube Duo User Manual page 2

MBot Cube Duo 3D Printer User Manual
Manual by Pellissier Technical Writing. Revision 1.1. 16 May 2017.
This manual is released under the Creative Commons Attribution-ShareAlike 4.0
International License.
MPrint® is a registered trademark of MagicFirm, LLC.
Pellissier Technical Writing is in no way affiliated with MagicFirm, LLC. The
information contained in this document is for general information purposes only.
The author assumes no responsibility for errors or omissions in the contents of
this document and disclaims any liability in connection with the use of this
information.
This manual describes the operation of an assembled MBot Cube Duo 3D Printer.
For assembly instructions consult the 3D Printer Assembly Instructions manual
that is available for download from
printer/mbot-cube.
Revision History
Revision
1.0
1.1
16 May 2017
http://www.mbot3d.com/product-3d-
Date
27 April 2017
16 May 2017
Revision 1.1
Description
First release
Updates after review by UA
Page 2 of 23