Getting Started; Connect Transmitter - Philips SLV3105 User Manual

3

Getting started

3.1

Connect transmitter

1. Connect the video source to the
transmitter
a. Take the supplied transmitter (A).
Find the SCART cable that is
connecting the video source to the
TV1. Disconnect this SCART cable.
Note: the video source can be a
satellite receiver, a VCR, a DVD
player or recorder...
Video source
2. Connect TV1
Plug the SCART cable from TV1 into
the SCART connector of the
transmitter (A).
Video source
3. Connect the power adapter
a. Take the supplied power
adapter (C) to plug the connector
into the DC 9V power connector
on the transmitter (A).
b. Plug the adapter into the power
outlet.
Getting started
Transmitter
Transmitter Transmitter
TV1
c. The green LED on the front panel
should be on.
Note: if it is not the case, press the
ON/OFF switch on the back of the
product.
4. Check that TV1 is working well
a. Switch on TV1
b. Check that TV1 is working well.
c. Switch on the connected video
source.
d. Check if TV1 shows the image of
the video source.
> The transmitter is connected
correctly.
5. Connect the remote control blaster
cord (D) to the IR socket.
Please reference to "3.4 Install the
remote control blaster cord" to
have more information.
EN
9 9