Advertisement
then "#"
6 Press "#" two times.
7 Wait 15 seconds, or press "#", to exit.
Under this Mode, use the TM Key to open the door directly.
Opening the door:
Operating instructions
1
Place the TM Key close to the
inductive area.
2
After 5 seconds
3.6. Add Code&TM Key User
3.61 Prior to adding the Code&TM Key User:
3.611 Write down the User Group, (001-200)
3.612 Prepare the TM Key, and Code.
3.613 User groups correspond to the guest Code&TM Key.
Several guest Code&TM Key's cannot be set under one group.
Identical guest Code&TM Key's cannot be used with different groups.
Operating instructions
1 Press "#" to start the lock
2 Input the
"Master
3 Within ten seconds (before the indicator light
switches off) input "01" then "#"
4 Within ten seconds (before the indicator light
switches off) input
No. can't be reused.)
5 Within ten seconds indicator light switches off,
input the
"Guest
6 Within ten seconds indicator light switches off,
bring the
"TM
then "#"
7 Press "#" 2 times.
8 Wait 15 seconds, or press "#", to exit.
Note: Set the Code first, and then the TM Key.
Under this Mode, use the TM Key together with the Code to open the door.
Opening the door:
Operating instructions
1 Get the
"TM Key"
inductive area.
2 Input the
"Guest Code"
3 After 5 seconds
Lock status
Keypad lights up, blue unlock indicator light, with one "Beep"
Lock motor activates, turn the handle to open
"Beeps" twice, red light flashes twice, door locks, indicator light
switches off.
Code" then "#"
"Group
No." then "#" (Group
Code" then "#"
Key" close to the inductive area,
Lock status
close to the
"Beeps" twice, keypad lights up, blue light flashes.
then "#""
Keypad lights up, blue unlock indicator light, with one "Beep",
motor activates, turn the handle to open
"Beeps" twice, red light flashes twice, door locks, indicator light
First "#" "Beeps" twice, lock status as above
Second "#" "Beeps" three times, Guest TM
Key User adding is complete.
Long "Beep", indicator light switches off.
Lock status
"Beeps" twice, keypad lights up, blue indicator
light flashes.
Lock status as above
Lock status as above
Lock status as above
Lock status as above
Lock status as above
First "#" "Beeps" twice, status as above
Second "#" "Beeps" three times, Guest Code
User adding complete.
Long "Beep", indicator light switches off.
Page3
Advertisement
