Table of Contents
Advertisement
4.4 INSTALLATION
4.4.1 Time offset
After switching on at the mains switch or after a power cut the time and date for the system clock
(timer) are transferred from the data received. To ensure that the time and date of the receiver
correspond to local time, a value for the deviation from standard time must be entered.
The offset value for CET summer time is {+2} hours, for CET winter time {+1} hour.
Please check or, if need be, correct the time offset value when setting up your equipment
and also when the time changes in spring and autumn.
(1)
Select using key 1 or using the
the desired time offset value using the
OK key.
N.B.:
If an incorrect time offset value is entered, programme times will be indicated
incorrectly.
4.4.2 Menu language
(1)
Select language.
The menu language can be switched between {{German}, {English}, {French}, {Italian},
{Spanish}, {Dutch} and {Turkish}.
(2)
Select character set.
Automatic switching of the character set is defined in the DVB standard - however
unfortunately not all stations observe this standard with the result that characters from
an incorrect character set may appear in a text.
Automatic character switching is provided in this unit, however various character sets
can be installed if required, so that e.g. Greek texts are shown in the correct character
set and are thus legible.
Selection: {Auto} {Standard} {Latin} {Cyrillic} {Arab} {Greek} {Hebrew}.
4.4.3 Signal paths
Activation and modification of each individual field are following the usual procedure.
Select the appropriate input field {XYZ} using keys 0...9 or
key.
The parameters are set using the
The selection is confirmed using the OK key.
(1)
TV
VCR
- - - - - - - - - - - -
CVBS
CVBS
CVBS
YC
RGB
CVBS
RGB
YC
YC
CVBS
YC
YC
CVBS:
=
FBAS:
=
YC:
=
(2)
TV >
VCR
If {ON} is selected, the video and audio signals are also transmitted from the TV socket
to the VCR socket in standby mode.
In {OFF} position the power consumption is reduced by approximately 0.5 watts.
W V
keys, then activate using the OK key and set
B C
keys. Confirm the modifications using the
V
W
or
key.
Video output signals at TV and VCR SCART sockets
The following groups are possible in the TV and VCR sockets.
(RGB offers the best picture quality on the television set)
(You can use YC with SVHS video recorders)
Composite Video Broadband Signal
Farbbild Austast Synchron Signal (equals CVBS)
like S video (Y: «brightness», C: «croma»)
Video/audio return path from TV to VCR unit
W
V
/
and activate using the OK
GB
17
Advertisement
Table of Contents
