Charging Instructions; Turning On/Off The Speaker; Pairing Your Device With The Speaker; Listening To Wireless Music - SoundLogic BWS-6/0454 Instruction Manual

INSTRUCTIONS FOR USE

Charging instructions

1. The Speaker comes with a built in rechargeable battery. Before using it for the first time
we recommend you charge the battery fully. Only use the supplied USB Cord to charge
the device.
2. Lift up the rubber lid for AUX IN and DC IN Jacks, connect the USB charging cable to a
computer USB port or USB source supply and the Micro USB plug to the charging port of
the device. The Red LED light turns on while the device is charging. It takes around 4
hours for the unit to fully charge. When the battery is fully charged, the LED would turn
off.

Turning on/off the Speaker

Press and hold the MODE button to turn on the unit, press and hold again to turn it off.
Pairing your device with the Speaker –
Your Speaker can stream wireless audio from any Bluetooth enabled device within the
range of 27-33 Feet. Simply follow the below steps.
1. Turn on the speaker.
2. Wait the mode indicator light blinks green only, then press the
repeatedly until the mode indicator light turns Blue and blink. The speaker is now in
pairing mode.
3. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer.
4. It will search for available Bluetooth devices.
5. The speaker would appear as "SL BUDDY", in the list of searched devices. Select it
from the available list of devices.
6. If required, enter the password '0000' to confirm pairing.
7. Once paired successfully, you would hear an indication tone and the Blue LED will
stay on.
8. If you fail to pair it within a few seconds or you want to pair it with a new device,
please repeat above steps.
Play your favorite song on the Bluetooth source device and music would now stream through
the speaker.

Listening to Wireless Music

Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the
speaker to stream wireless music. Once it is paired, play music from your device.
Press the VOL+ or VOL- button on the unit to adjust volume.
NOTE:
After first time pairing, the unit will be automatically paired
before when the bluetooth of the
Tips!!
1. Short press the MODE button to switch different functions of the speaker. The
functions are – Bluetooth/AUX/Wi-Fi.
2. When the speaker is not in use, turn OFF the device to save the battery power.
device and speaker are activated and
4
MODE Button
with the device connected
in range.