Using Tv; Turn On The Tv Or Switch To Standby; Switch Channels - Philips 43PUD6701/30 User Manual

4 Using TV

This section introduces the basic operations of
the TV.
Turn on the TV or switch to
standby
Standby LED indicator
Standby Indicator
Turn on the TV
Plug the power cord into the AC power
•
outlet.
» If the standby LED indicator is red,
press (Standby-Power on) on the
remote control.
Switch to standby in the power-on status
Press the (Standby-Power on) on the
•
remote control.
» The standby indicator turns red.
Tip
• Although the TV set does not consume much
electricity in standby, but still consumes some;
only unplugging the power plug can this product
be completely powered off.If it is not used for a
long time, unplug the power plug.

Switch channels

Do not use the channel list to
switch channels
• Press Channel +/-on the remote control.
Enter the channel number using the
•
number keys on the remote control.
Press Back/Input button on the remote
•
control to switch back to the previous
channel.
Using the channel list to switch
channels
You can use the channel list to watch all the
channels that can be received.
1
Press OK.
» To display the channel list.
2
Press to select channels.
3
Press OK to watch the selected channel.
4
Press to switch to the channel you
watched previously.
EN-GB 9