Tower Conversion Kit; Dust Proof Filter; External Tape Drives - NEC Express5800 Configuration Manual

Hide thumbs Also See for Express5800:
Table of Contents

Advertisement

CONFIGURATION GUIDE
8.4

Tower Conversion Kit

Product Name / Description
Tower Conversion Kit
23 inch height pedestal with front bezel
8.5

Dust Proof Filter

The server supports the dust resistant feature. Choose the following kit to install the system in dusty places.
Category
Filter
8.6

External Tape Drives

8.6.1
Tape Drive Selection
Refer to the section in accordance with your type of tape drives.
LTO: Refer to
RDX: Refer to
8.6.2
LTO / SAS
Category
Controller
Required
External Cable
Required
Tape Enclosure
Required
Power Supply
Recommended
Internal Cable
Drive
2 bays available
8.6.3
Notes for Double Backup
In a single backup configuration, in case a CPU/IO module or backup device fails, backup is not possible until the failed part is
repaired or replaced. If this does not meet your system requirements, consider a double backup configuration.
Refer to the following notes on double backup configuration.
When configuring two sets of a SAS controller, a SAS cable and a backup device, two backup devices are recognized
separately by the OS. When scheduling an automatic backup job, make a job for each backup device so that the other backup
device can backup in case one device fails.
With BrightStor ARCserve Backup, backup is not executed if you enter an asterisk (*) in the group box under the destination tab
when defining a job. Be sure to create two backup jobs by correctly selecting the device group for the group box, and entering
an asterisk (*) or the name of the media in the media box.
NEC Corporation
NEC Express5800/R320f / Windows model
Product Name / Description
4U-FT Dust Filter
For R320e Dust Proof filter 10 pcs, attachment brackets for the front
bezel included
8.6.2
8.6.5
Product Name / Description
SAS Controller
1 x Broadcom SAS9300-8e 12Gb/s SAS, 8(SFF-8644), PCIe3.0(x8),
Low Profile / Full Height
External SAS cable
2 m, for Tape Drive Enclosure connection
1U Device Expansion Unit
2 x 5-inch media bays
Power Unit
non-hot plug power supply
SAS Cable
For 1U Device Expansion Unit internal connection
NOTE:
- Required one per each tape drive.
Internal LTO (SAS)
LTO4, Half height, Native capacity 800GB, black
Internal LTO (SAS)
LTO5, Half height, Native capacity 1500GB, black
Internal LTO (SAS)
LTO6, Half height, Native capacity 2.5 TB, black
Internal LTO (SAS)
LTO7, Half height, Native capacity 6 TB, black
Revision 1.0, August 2017
Part Number
N8843-005
Part Number
N8847-002
Part Number
N8803-041
K410-322(02)
N8141-69F
N8181-124F
K410-335(00)
N8151-127
N8151-128
N8151-129
N8151-136
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

R320f

Table of Contents