Installation; Local Time; Settings - Philips 0 User Manual

Installation Submenu
Local Time Submenu
Settings Submenu
28 C H A N G E T H E S E T T I N G O F YO U R R E C E I V E R

6.4 Installation

Allows you to configure your system, set up your
modem, search for existing channels, check receiver's
status, set up local time, and restore factory settings of
your receiver.
Once your terrestrial receiver has been properly installed
and configured, you will rarely use the Installation
submenu. However, the Installation submenu will be
useful, if for example, you buy a new TV and you want to
make sure your receiver makes the best use of the new
TV's features, or if you change your antenna setup.
Below, you will find description of some of the
Installation submenu screens.
Note: When the decoder is locked, access to the I I n n s s t t a a l l l l a a t t i i o o n n
menu is protected by PIN code.

6.4.1 Local Time

You may need to adjust your local time. Use the
keys to change the Time Zone until the Local Time
setting corresponds to your local time. Then press the
OK key to confirm any changes.

6.4.2 Settings

The Settings submenu allows you to change
TV/system/modem/upgrade/country settings.
/