Table of Contents
Advertisement
<Page 7>
Pairing Your Speaker
1. Place the Speaker and the device where they are easily viewable by no more than
1 meter apart.
2. Ensure the speaker is OFF.
3. Ensure that your mains
AA batteries into the battery compartment.
4. Press and hold the MFB until the speaker Status Indicator alternately flashes
blue and red.
5. Activate your mobile handset's Bluetooth function by referring to your mobile
handset user guide for details.
6. Set the device to search for Bluetooth devices within about 1 meter as instructed
in the mobile handset user guide and select "i.Tech Music Master" from the list.
7. Enter the preprogrammed passkey "8888" and press "OK" to pair your earphone
and device. When the pairing is complete, the speaker Status Indicator will flash
blue rapidly for 5 times followed by a long beep.
8. Go back to your device's main menu. For certain device models, a headset / audio
icon will be shown on the screen. You should now be able to make and receive
calls using your earphone and listen stereo music via your earphone.
IMPORTANT If the pairing cannot be completed within 2 minutes while the
pairing mode is activated, the speaker Status Indicator flashes purple red with 3
beeps and the headset is turned off. Please repeat Steps 2 to 7 to pair the headset
and the mobile handset again.
adaptor is plugged in the speaker.
For portable use, place 4
Advertisement
Table of Contents
