<Page 0> Contents i.Tech Music Master Overview Getting Start Powering your speaker from mains adaptor Powering your speaker with batteries Operating Performance Talk Time and Standby Time Music Play Time Low Battery Turning your Speaker On & Off Turning On your speaker...
<Page 2> Getting Start To use your i.Tech Music Master (the “speaker”), please follow these simple steps: Powering your speaker from the mains adaptor 1. The speaker is powered by the mains adaptor (Optional accessory). 2. The power socket for the mains adaptor is located on the back of the speaker.
<Page 3> Powering your speaker with batteries For portable use, or in places where there is no mains plug, insert 4 x AA batteries into the battery compartment (refer to Fig 4). Make sure that the batteries are placed in the right direction. (Batteries are not supplied with the speaker.) Before inserting the batteries please make sure that the speaker is turned off.
<Page 4> Operating Performance Talk & Standby Time The portable mode offers up to 6 hours talk time and up to 150 hours standby time. When no calls are in progress, the headset remains turned on in standby mode. Music Play Time The portable mode offers up to 6 hours music play time.
<Page 5> Turning Your Speaker On and Off Turning On the Speaker Press and hold the MFB for 2 seconds until you hear a short beep. The Status Indicator will flash blue. IMPORTANT Press the MFB again each time you turn on the speaker to reactivate pairing so that the connection between the speaker and the mobile handset is resumed.
<Page 6> Pairing Your Speaker Prior to using your speaker for the first time, you must pair it with a Bluetooth-enabled mobile handset or Portable Media Player. The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset. Speaker pairing procedure is subject to different models of mobile handsets and portable media player.
6. Set the device to search for Bluetooth devices within about 1 meter as instructed in the mobile handset user guide and select “i.Tech Music Master” from the list. 7. Enter the preprogrammed passkey “8888” and press “OK” to pair your earphone and device.
<Page 8> Using Your Speaker Answering a Call When there is an incoming call, you will hear ringing through the speaker. Press the once to accept the call or answer the call via your mobile handset in the normal way. For transfer the sound from speaker to mobile handset during the call active, long press the volume key for 5 seconds.
<Page 9> Using Your Earphone Voice Dialing from Your Earphone If your mobile handset is equipped with a voice dialling function, simply press the MFB on your headset and when you hear a beep, say the voice tag. IMPORTANT Please make sure to record voice tag into the mobile handset first before using voice dialling function.
To active the Remote Control Features (AVRCP), your speaker must support AVRCP profile. Sound Enhancement (SRS WOW) Press once to enable the speaker on sound enhancement mode. NOTE SRS, the SRS symbol and WOW® are trademarks or registered trademarks of SRS Labs, Inc. and licensed to i.Tech Dynamic Limited.
<Page 11> Adjusting the Volume Press the Volume Key repeatedly until you reach the desired volume level. Resetting / Removing the Pairing You may want to reset the speaker to its original settings. This also clears all current pairings. 1. Ensure the speaker is OFF. 2.
“Resetting / Removing Pairing” section to return to factory default setting. The device is turned on again and all pairings are cleared. The i.Tech Music Master is compliant with and adopts the Bluetooth Specification 1.2. However, interoperability between the device and other Bluetooth-enabled products is not guaranteed because it depends on compatibility.
<Page 12> Care and Maintenance 1. Do not expose the speaker to liquid, moisture or humidity as it is not waterproof. 2. Do not use the speaker outdoors when it is raining. 3. Do not use abrasive cleaners to clean the speaker. 4.
<Page 13> Safety Information Never allow children to play with the speaker as it contains small parts that may be of choking hazard. Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.
<Page 14> Product Specifications Bluetooth Part Bluetooth Specification: Version 1.2 Class 2 Bluetooth Profile Supported: Headset, Handsfree, A2DP and AVRCP Range of Frequency: 2.4GHz Spectrum Operating Range : 10 meters Talk Time*: Up to 6 hours Music Play Time*: Up to 6 hours Standby Time*: Up to 150 hours Audio Part...
<Page 15> Declaration of Conformity (DOC) We, i.Tech Dynamic Ltd., declare that the following product: Product Name: i.Tech Music Master Model No.: C51-A5153-XX Is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive.
Page 19
The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises Limited and/or its affiliates. i.Tech declare under our sole responsibility that the speaker system is in conformity with the provisions of the following Council Directives: 1999/5/EC. This device complies with Part 15 of the FCC Rules. Operation is subject to the...
Page 20
Notes on Environmental Protection After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collection points that are set up for this purpose or designated points of sale.
Need help?
Do you have a question about the C51-A05153 series and is the answer not in the manual?
Questions and answers