Table of Contents
Advertisement
SE-208BW User manual
Do not remove the adapter or internet cable from theOptical Smart Hub while firmware upgrade is in progress.
You can view the firmware version installed on the Optical Smart Hub and upgrade it to the latest version.
1. By referring to the "Firmware update" page, check whether there is a new firmware version.
2. Click the
Browse
3. Click the
Upgrade
Save Configuration
You can save the current configuration of the Optical Smart Hub as a file.
1. Click the
Save
button.
2. Specify the folder where the file will be saved and the file name, and then click the
3. If the message as shown in the figure above is displayed, click the
Note
This step cannot be displayed depending on the OS.
Restore Configuration
You can restore the system settings using the configuration file you saved previously.
1. Click the
Browse
2. Click the
Restore
3. You must restart the Optical Smart Hub to apply the restored settings. For detailed information on how to restart the Optical Sma
refer to the following "Turn Off Server" section.
Turn Off Server
You can restart or shut down the running Optical Smart Hub.
Click the
Restart
Click the
Turn Off
HOW TO USE
How to use the ODD
file:///N|/TSST-Project/EN/index.html[2011-11-08 오후 2:30:46]
button and then select the downloaded firmware setup file.
button.
button and then select the configuration file that will be used to restores the system settings.
button.
button to restart the Optical Smart Hub.
button to shut down the Optical Smart Hub.
Save
button.
Save
button.
Hide quick links:
Advertisement
Table of Contents
