Table of Contents
Advertisement
AXRX-QDM Receiver Users Guide
3
Current
configuration
4
Alarm Indicator
6. Advanced Setup
6.1 Installing the Web Browser on your PC
Note: Most PCs will have a browser installed. This topic is only necessary if you wish to
change to a different browser.
Before you Start
This is necessary:
A PC with Windows XP or better.
The PC to have a network card configured for a fixed IP Address.
The Browser Application you wish to use. (Internet Explorer or Firefox for example).
Step 1: Install the Browser Application on your PC
1. Install Browser on your desktop or other convenient location on your PC.
2. Make sure you have a Browser start-up icon on your desktop to start the program.
Next Steps
Connect your PC to the AXRX-QDM Receiver with IP.
6.2 Connecting your PC to the AXRX-QDM Receiver with
IP
You'll wish to configure your AXRX-QDM Receiver to do useful operations immediately.
The AXRX-QDM Receiver has Control Pages accessed from your web browser which
enables you to do many configuration tasks quickly and easily.
Before you Start
This is necessary:
A PC with a web browser.
An Ethernet cable.
A powered AXRX-QDM Receiver unit.
Shows the current configuration of the unit, this could be any
of the 16 programmable presets.
Shows only when there is an alarm or fault on the unit. This
usually means that there is no RF lock or the incoming
stream cannot be decrypted.
Table 5-8 – AXRX-QDM Front Panel Display Key
26
Advertisement
Table of Contents
