Changing The Display Language; Setting Job Timeout; Using Power Saving Feature; Setting The Default Paper Size And Type - Samsung CLP-610 series User Manual

Changing the display language

To change the language that appears on the display, refer to the following
steps.
1 Press Menu on the control panel until you see 5.System Setup on
the bottom line of the display.
2 Press OK to access 5.System Setup.
3 Press the left/right arrow until Language displays.
4 Press OK.
5 Press the left/right arrow until the language you want displays.
6 Press OK.
7 Press Stop to return to machine ready mode.

Setting job timeout

1 Press Menu on the control panel until you see 5.System Setup on
the bottom line of the display.
2 Press OK to access 5.System Setup.
3 Press the left/right arrow until Job Timeout displays.
4 Press OK.
5 Press the left/right arrow to select the amount of time the machine
will wait.
6 Press OK.
7 Press Stop to return to machine ready mode.

Using power saving feature

The machine provides power saving features. When the machine is not
in use, you can save electricity with the provided power save mode. Set
the specific time the machine goes to the power save mode.
1 Press Menu on the control panel until you see 5.System Setup on
the bottom line of the display.
2 Press OK to access 5.System Setup.
3 Press the left/right arrow until Power Save displays.
4 Press OK.
5 Press the left/right arrow to select the amount of time.
6 Press OK.
7 Press Stop to return to machine ready mode.

Setting the default paper size and type

You can select the paper size you would like to keep for printing job.
Note
For detailed information on the Custom paper size setting and
the paper type setting, see "Setting the paper size and type" on
page 4.7.
1 Press Menu on the control panel until you see 4.Paper on the
bottom line of the display.
2 Press OK to access the paper setup.
3 Press the left/right arrow until Paper Size displays.
4 Press OK.
5 Press the left/right arrow to select the paper size such as A4, Letter
or Custom.
6 Press OK.
7 Press Stop to return to machine ready mode.

Setting the default tray

If you want to select the particular tray for the print job, use the Paper
Source feature.
1 Press Menu on the control panel until you see 4.Paper on the
bottom line of the display.
2 Press OK to access the paper setup.
3 Press the left/right arrow until Paper Source displays.
4 Press OK.
5 Press the left/right arrow to select the paper tray, such as Tray 1,
Tray 2, MP Tray, Manual Feeder or Auto.
Note
If you set this menu to Auto, an additional menu, Tray
Chaining appears. With Tray Chaining, the machine finds a
secondary available tray to continue a printing job in case the
primary tray, usually tray 1, is vacant.
6 Press OK.
7 Press Stop to return to machine ready mode.
3.5
<Getting Started>