Advertisement
Contents
Contents
Contents...........................................................................................................................................................................1
Chapter I : A brief introduction of S82V ...............................................................................................................2
Chapter II : S82V receiver main unit .....................................................................................................................3
Chapter Ⅲ : S82V accessories............................................................................................................................... 10
Appendix 1: Frequently Asked Questions.......................................................................................................... 17
GPS
Page 1 of 17
S82V
Advertisement
Related Manuals for South S82V
Summary of Contents for South S82V
-
Page 1: Table Of Contents
Contents Contents Contents...................................1 Chapter I : A brief introduction of S82V .......................2 Chapter II : S82V receiver main unit ........................3 Chapter Ⅲ : S82V accessories..........................10 Appendix 1: Frequently Asked Questions......................17 Page 1 of 17 S82V... -
Page 2: Chapter I : A Brief Introduction Of S82V
Chapter I: A brief introduction of S82V Chapter I : A brief introduction of S82V The SOUTH S82V is a RTK GNSS receiver, built for precision, reliability and user friendliness. S82V is able to receive GPS signals, and also satellite signals from GLONASS and GALILEO. -
Page 3: Chapter Ii : S82V Receiver Main Unit
Chapter II: S82V receiver main unit Chapter II : S82V receiver main unit II.1 The receiver main body There are three parts to the main unit: the cover, a protective rubber ring and the main structure. The cover protects the GNSS antenna inside. The protective rubber ring has the function of additional protection against water and dust. - Page 4 Satellite light Built-in power supply light External power supply light Fig. 2.2 – S82V keys and indicator lights As you see by the figure 2.2 there are three sets of indicator LEDs, each with two different colors and two different functions.
- Page 5 Fig. 2.3 – S82V battery power LED PWR (green): external power supply light (Fig. 2.4). The status of the external power supply are indicated as follows 1. Fixed: External power supply in good condition. 2. Flashing: External power supply low Fig.
- Page 6 In static mode, it will remain lit in normal operation conditions. In RTK mode, it shows if the data link module working in good condition. Fig. 2.8 – S82V Data Link LED F Key : Function key Switches between the working modes (static, base or rover) and RTK communication modes.
- Page 7 Keep the P key + F key pressed until the six LEDs blink at the same time (Fig. 2.9), then release the keys. Fig. 2.9 – S82V six LEDs blinking simultaneously STA LED is lit, now every time the F key is pressed, the working mode will change.
- Page 8 Static mode: When the BAT light blinks, press P key to confirm, you will enter static mode. The following display shows the receiver in static mode: Fig. 2.11 – S82V battery power LED Selecting the communication mode After you have entered working mode, press and hold F key, when you hear 2 beeps, and see a green light blinking, release the key, wait several seconds, then press F key, the 3 green lights will blink in turns.
- Page 9 Fig. 2.12 – S82V battery power LED Fig. 2.13 – Bluetooth and DL LEDs Page 9 of 17 S82V...
-
Page 10: Chapter Ⅲ : S82V Accessories
Chapter IV S82V accessories Chapter Ⅲ : S82V accessories Ⅲ.1 The case of S82V Fig. 3.1 - S82V case Page 10 of 17 S82V... -
Page 11: Power Supply
The charger can charge both batteries simultaneously. The lights of the charger shows if a battery is being charging or if it’s already charged. Fig. 3.3 - S82V charger and adaptor Controllers The Psion controller standard configuration includes two batteries, a charger and an adaptor. - Page 12 Chapter IV S82V accessories Fig. 3.4 - Psion battery Fig. 3.5 - Psion adaptor Fig. 3.6 - Psion charger Page 12 of 17 S82V...
- Page 13 Chapter IV S82V accessories Ⅲ.3 Cables Radio cable External power supply cable (PCRR) shape a “Y” connection cable. It is used to connect the base mainframe (red), transmitting radio (blue) and connect the accumulator (red and blue clip). It has the function of power supply and data transfer .(Fig 3.7) Fig.
- Page 14 It can also be used for connecting GEOS controller and receiver, in case of malfunctioning of the Bluetooth device. See Fig. 3.10. Fig. 3.10 - Multi-function communication cable Page 14 of 17 S82V...
- Page 15 Bluetooth device. See Fig. 3.11. Fig. 3.11 - Communication cable between Psion and receiver Fig. 3.12 – 30cm supporting pole Fig. 3.13 – Bracket for controllers Fig. 3.14 – Tribrach and adapter with optical plummet Page 15 of 17 S82V...
- Page 16 Fig. 3.15– Connector between tribrach and receiver Fig. 3.16 – Measuring tape On the basis of the configuration chosen (base or rover) some of these accessories are included or not in the receiver bundle. Page 16 of 17 S82V...
-
Page 17: Appendix 1: Frequently Asked Questions
2. The external and built-in power lights are blinking and I do not succeed in receiving differential corrections. Solution: The serial code is expired, please contact SOUTH for a new code. 3. I do not succeed in connecting handheld and receiver by Bluetooth.
Need help?
Do you have a question about the S82V and is the answer not in the manual?
Questions and answers
Estoy teniendo problemas para conectar mi south s82v **** una colectora de datos nomad que trae el software fast survey, quisiera saber si hay alguno modo de revisar si se puede conectar el gnss a la computadora para revisar las configuraciones del gnss y ver qué está pasando o tratar de solucionar algo