Cowon S9 User Manual page 21

Basic Use
1. Checks status of stereo or mono signals
2. Displays the country for radio signals, which can be changed
under Settings mode.
3. Press it briefly to change the tuning frequency at 0.1MHz
intervals. Press it and hold it to searches and jumps to the next
tuning frequency with good signals.
In preset mode, it changes to either previous preset channel or
the next preset channel.
4. Selects the Preset mode. In this mode, only the preset
channels can be accessed.
5. Displays the operational buttons on the rear side.
6. Sets stereo or mono setting
7. Automatically searches the FM frequencies with good signals
and enters them into the preset channels
8. Records the currently selected channel
9. Displays the preset search mode. You can add the currently
tuned frequency to the preset channel or delete a preset
channel.
10. Listens to the selected preset.
11. Saves the current frequency to the selected preset.
12. Deletes the selected preset.
As COWON S9 is not equipped with an external antenna but the earphone
plays a FM antenna role, stretch the earphone as straight as possible to
improve the reception sensitivity.
Make sure the earphone is plugged in when you make FM recording.
Only FM signal is available; reception of AM signal is not supported.
COWON S9 21