Table of Contents
Advertisement
3.1.5 Remove the main board (See figure 6, figure 7)
• Prior to performing the following procedure, remove the top
cover, drive unit.
(1) Disconnect the card wire from connectors CN4001,
CN4103, CN6801,
CN6802
(2) Disconnect the socket wire from connectors CN1101,
CN1102,
CN7001
on the digital board and display board.
(3) Disconnect the socket wire from connector CN5303, on the
main board.
(4) Disconnect the power cord from connector CN5001, on the
main board.
(5) Remove the six screws F attaching the main board.
(6) Remove the seven screws G attaching the rear panel with
main board.
3.1.6 Remove the dispiay board (See figure 8)
• Prior to performing the following procedure, remove the top
cover, drive unit, front panel assembly.
(1) Disconnect the socket wire from connector
display board.
(2) Remove the two screws H attaching the display board.
on the main board.
CN7001
on the
CN4001
CN1101
Display board
F
Digital board
F
CN1102
Main board
CN6802
CN4103
CN6801
Fig.6
Rear panel
G
Fig.7
H CN7001
Display board
Fig.8
CN5001
F
CN7001
F
F
CN5303
F
H
(No.YD073)1-9
Advertisement
Table of Contents
