New GSD file(s)
Note
Click on
Click into the window next to netDevice and select "Network/Device Catalog..." from the menu.
____________________________________________________________________________________________________________
G1
Introduction to AC500
If you install additional GSD files to the installation of the Control Builder CD's
GSD files they have to be added to the device catalog of SYCON.net. To do
this apply subsequent procedure.
The GSD files have to be copied to the corresponding directory beforehand
(\ProgramFiles\HilscherGmbH\SYCONnet\ABBPBGenericSlaveDTM\GSD).
Attention: Handling of GSD files only works that way in case of an empty
project!
. Open the 'Tools' folder. Double click on the entry SYCON.net.
1-120
AC500 / Issued: 07.2006