Fcc Part 68 And Acta - Philips SJA9190/17 User Manual

EN
Troubleshooting & FAQ
Make sure the batteries are installed properly.
The POSITIVE and NEGATIVE ends of the bat-
teries must line up according to the installation
diagram inside the battery compartment.
Make sure you have connected the telephone
cord between the telephone wall jack and one
of the telephone jacks on the back of the unit.
Make sure you have subscribed to Caller ID
service from your local telephone company.
Wait for the second ring before answering the
phone. The Caller ID information is received
between the first and second ring.
Make sure you have a fresh set of Alkaline bat-
teries installed, or that you are using the
FCC Regulations
optional AC adapter.

FCC Part 68 and ACTA

Information
Your Caller ID unit has been registered with
the Federal Communications Commission
(FCC), and it complies with the standards set
forth in part 68 of the FCC rules. The FCC
requires that we provide the following informa-
tion.
11