Configuration Without A Dhcp Server - Bodet 907 NETSILON 7 Quick Start Manual

3.4 Configuration without a DHCP server
Without automatic assignment of an IP address by a DHCP server, it is necessary to manually assign a fixed IP
address.
To manually configure the Netsilon network settings, enter the following three parameters:
>
IP address assignment
> This is a unique address assigned to Netsilon by the network administrator. Ensure that the chosen
address is available.
>
Subnet mask
> The subnet mask defines the number of bits taken by the IP address. The number of bits used in the
netmask may range from 8 to 30 bits.
>
Gateway
> The gateway address is required if communication with Netsilon is outside the local network. By
default, the gateway is disabled.
To configure these three parameters, use the Netsilon network menu, via its control panel:
10:54.32
Tues 19 SEP 2016
System
Network
Network
USB transfer
Display ETH0
Config. ETH0
Config. ETH0
DHCP: YES ú
IP address Auto ok
ok
õ
ok
õ
ok
õ
ok
õ
DHCP: NO ú
Fixed IP address ok
IP Address:
192.168.1.0 ok
IP mask:
255.255.255.000 ok
IP gateway:
---.---.---.--- ok
Saving in progress...
Resetting in pro-
gress...
10:54.32
Tues 19 SEP 2016
Enter the values with the
keys.
Note: these values are determined
by the network administrator.
and
9