PEUGEOT 5008 2017 Handbook page 61

Version without Keyless Entry
and Starting
F Switch off the ignition.
F Turn the key to position 2 (Ignition).
F Press the closed padlock button for a few
seconds.
F Switch off the ignition and remove the key
from the switch.
The remote control is now fully operational
again.
Version with Keyless Entry
and Starting
F Place the mechanical key (integral with the
remote control) in the lock to unlock your
vehicle.
F Place the electronic key against the back-up
reader on the steering column and hold it
there until the ignition is switched on.
F With a manual gearbox, place the gear
lever in neutral then fully depress the clutch
pedal.
F With an automatic gearbox, select
position P, then firmly press the brake
pedal.
F Switch on the ignition by pressing the
"START/STOP" button.
The electronic key is now fully operational
again.
If the fault persists after reinitialisation, contact
a PEUGEOT dealer or a qualified workshop
without delay.
Access
2
59