Connecting To The Network; Navigating Web Ui Menu - C Spire U772 User Manual

Automatic connection mode and preferred service mode can be set from "Setting" menu in the
main menu bar (see page ##).
● Service Type: Displays service type your modem currently acquires.
● Signal strength bar: Displays your current signal strength. Supports 0- 6 levels of signal
strength.
● Connection time: Displays the time after your device is connected.
● Connection button: Connects you to a network available.
The following table provides device status and connection button descriptions.
Status Connection Button
"Disconnected"
Connect
"Connected"
Disconnect
"Not Activated"
Activate

Connecting to the Network

Once your device is properly configured, connecting to the Internet is as simple as clicking
Connect. Once connected, Connect will change to Disconnect. Simply click Disconnect to
end your current connection. To connect to any other network shown, select it, and then click
Connect.

Navigating Web UI menu

The main menu appears down across the top of the browser interface. Simply click the menu in
the main menu bar. The screen will display sub menus under each main menu item.
Click to open sub menu items. The icon will be changed to
menu items.
Description
Radio power is on and device is disconnected.
Ready to connect.
Device is connected and available to disconnect the
connection.
Device activation is required.
9
. Click to close the sub