SC iStick TC100W User Manual page 49

SC iStick TC100W – Regulating the Output
47
Adjusting the TCR Mode (M1, M2, M3)
To reach the TCR menu, press and hold the „fire" and the „down" buttons simultaneously
while the unit is off�
1� Press the „Up" / „Down" key to switch between TCR M1, M2 and M3�
2� Confirm the desired mode with the fire button�
3� Press the „Up" / „Down" button to adjust the TCR values of the material of the coils
being used�
4� Confirm your setting with the fire button or wait 10 seconds�