SC iStick TC100W User Manual page 51

SC iStick TC100W – Regulating the Output
Notes for locking / unlocking Base Resistance
1� Only use this function when your coil is at room temperature, so that the correct „base
resistance" can be displayed on the lock mode�
2� When you remove a clearomizer and put it back, the battery remembers the set „base
resistance"� When the temperature rises, the resistance may increase� When you change
the coil in Unlock mode, the display shows „New coil up same down" and the coil
resistance can be readjusted� If the coil is the same as before, press the „down" button�
If this is a different coil, press the „up" button� Be sure to unlock the resistance when
you want to change an atomizer or to a coil of different resistance�
3� If you accidentally use a conventional coil or a coil with a resistance above 1�5 ohms
in the modes TC-Ni, Ti-TC, TC-SS and TCR (M1, M2, M3), the unit automatically switches
into VW mode�
49