Basic Functions; Powering On And Off; Enabling Wps - BandLuxe P530 series User Manual

Getting Started

Basic Functions

Powering On and Off

To power the P530 on, slide the device up to the ON position. When
the P530 is powered on, the LEDs start blinking (approximately 16
secs).

Enabling WPS

WPS is a standard designed to easily setup and automatically configure
secure WLAN networks between two WPS supported devices. If the
client PC supports WPS, the WPS feature can be a user-friendly and
simple process to get your WLAN network up and running.
1. Enable WLAN.
2. Press and hold the WPS button for at least 5 seconds.
3. Confirm the WPS option on the client PC trying to connect to the
P530. WPS connecting device followed by New device
connected is displayed.
Note: The safe temperature range for discharging and

charging the battery is as follows:
Warning: When using in normal temperature environments,

high battery power consumption may cause the battery
temperature to exceed 45 degrees and thus stop charging if
connected to a wall outlet. It is not recommended to charge
and use the device at the same time.
Discharging (operating) temperature: 20~60 degrees Celsius,
maximum 75 degrees Celsius; once temperature exceeds 70
degrees the device will power off.
4
 Charging temperature: 0~40 degrees Celsius, maximum
45 degrees Celsius; once temperature exceeds 45
degrees the device will stop charging.