Subscribe to Our Youtube Channel
Related Manuals for Vista P2-S(E)
Summary of Contents for Vista P2-S(E)
- Page 1 - 1 - www.vistacnc.com VistaCNC P2-S(E) CNC Control Pendant for UCCNC - 1 - www.vistacnc.com P2-S Pendant UCCNC Manual v. 1.0...
- Page 2 - 2 - www.vistacnc.com PREFACE Any machine tool, including computer controlled machine tool, is potentially dangerous. VistaCNC LLC accepts no responsibility for any damage or injury caused by its use. It is your responsibility to insure that you understand the machine you are using and the procedures for safety operations. If you are in any doubt you must seek guidance from a professionally qualified expert rather than risk injury to yourself or to others.
- Page 3 - 3 - www.vistacnc.com FEATURES Plug n’ Play USB connection and controls. 100 steps high precision MPG encoder. Step, Velocity and Continuous mode jogging through MPG. Feed rate, Spindle speed, and Step jogging size and rate change through MPG. ...
- Page 4 - 4 - www.vistacnc.com PLUGIN and FW Download the latest UCCNC P2-S Plugin package from www.vistacnc.com download page and unzip the package. The package includes following files: This manual P2Spendant.dll --- P2-S pendant UCCNC plugin file Pendant FW update procedure --- for pendant firmware upgrade Pendant FW Loader --- tools for FW upgrade P2S_UCCNC_FW_v --- FW for UCCNC Move the plugin file into UCCNC Plugins directory.
-
Page 5: Functions And Operations
- 5 - www.vistacnc.com FUNCTIONS and OPERATIONS 1. Axis selection Turn axis selection knob to X, Y, Z, or A position to select an axis to jog. □ Selected axis name. It flashes at ½ second rate. □ Step size and Step jogging rate. The size and rate display changes alternately every 2 seconds. 2. - Page 6 - 6 - www.vistacnc.com 2.2 VELOCITY, SLOW V and SLOW V RATE VELOCITY Axis moves at 0 to 100% of maximum axis speed based on how fast the MPG wheel is turned. SLOW V Pressing and holding the EN side button while in V mode temporally slows down the axis movement .
- Page 7 - 7 - www.vistacnc.com FEED OVERRIDE In F% mode, turning MPG changes current feed overridden (FO) rate SPINDLE OVERRIDE Pressing and holding the EN side button to change to S% mode. In S% mode, turning MPG changes current spindle speed overridden (SO) rate. 2.5 AXIS ZEROING Turn axis selection knob to select an axis and double click to zero selected axis...
-
Page 8: Operation Controls
- 8 - www.vistacnc.com DECIMAL DIGITS Pressing and holding the EN side button to set up number of decimal digits to display. Settable number: 2, 3 and 4. □ 4 and 2 decimal digits. 3. Operation Controls START / HOLD button Double click execute the function... - Page 9 - 9 - www.vistacnc.com 4. E-Stop switch button 5.1 E-Stop switch button in P2-S model Press E-STOP switch button to send out E-Stop signal to UCCNC application and activate Emergency Mode in UCCNC. When the button is pressed, the switch is locked down. Twist the button to reset the button and reset E-STOP.
-
Page 10: Specifications
- 10 - www.vistacnc.com E-STOP switch and EE box connection in P2-SE SPECIFICATIONS 100 steps (clicks) per Rev MPG. MPG MTBF > 10000 hour. Shipped with10' High Speed USB cable. Extendable to 15’ with extension cable, or to 45’ with ...
Need help?
Do you have a question about the P2-S(E) and is the answer not in the manual?
Questions and answers