Table of Contents
Advertisement
10.4 Test procedure:
TX channel set to 9750 (TX frequency = 1950MHz), Module Type=1,
Power Position=81, use the spectrum to measure the value.
Spectrum Setting: Freq=1950MHz. Caution: Must add the attenuator/DC
Blocking or series connection 100PF Cap on the end of the Cable. It will avoid
the direct current damage the spectrum authentically.
The Power values all are relativity not absolute.
R968.1
華
碩
電
腦
華
碩
電
腦
GTC ■ Service Manual
45
ASUS Proprietary
Advertisement
Table of Contents
