Nokia G-240WZ-A User Manual page 44

8. On the Searching screen, there will be a
message displayed that reads, "Make sure
your Wi-Fi camera is powered on and in
pairing mode at this time."
9. Login to ONT web portal, and under
Network and Wireless (2.4GHz) make sure
Enable WPS is enabled and WPS Mode is set
to PBC.
10. Select the Save option.
a) Network
b) Wireless (2.4GHz)
c) Enable WPS
d) PBC
11. Long press WPS button (small white button in the
back of camera) until you see a blue LED blink.
12. Press WPS 2.4.G button (small black button in the
back) once in the ONT. The camera will connect to
ONT, and the blue LED will go off and you will see
a solid green LED.
44 Nokia Smart Home user guide
Figure 81
Figure 82