Advertisement
Step 5
Repeat Step 4 with the right rack with spacers (14, 15) on the right hand side of the motorcycle and secure
with the two M8x45 bolts (10) and two M8 washers (12).
NB: Do not tighten the bolts yet.
Step 6
Position the back brace (4) with the ends located on top of the tabs
provided at the rear of the left (1) and right (2) rack sections.
Use the two M8x20 bolts (9), four M8 washers (12) and two M8
Nyloc nuts (13) to attach the brace to the two pannier rack sections.
NB: Do not tighten the bolts yet.
Advertisement
