NETGEAR WNAP320 Reference Manual page 88

Table 3. Access Point Default Configuration Settings (Continued)
Feature
Operating Mode
Access Point Name
Wireless Communication
11 b/g/n Wireless Network Name (SSID) NETGEAR_11ng
Broadcast Network Name SSID
Security
Transmission Speed
Country/Region
802.11gn Radio Frequency Channel
Output Power
Wireless Card Access List
WMM Support
a Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
56 | Appendix A. Supplemental Information
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Description
Access Point
netgearxxxxxx where xxxxxx are the last 6 digits of the
wireless access point MAC address.
Enabled
Enabled
Disabled
a
Best
Varies by region
Auto
Full
All wireless stations allowed
Enabled