Saving The Configuration; Restoring The Configuration - NETGEAR WNAP320 Reference Manual

Configuration File Management
The ProSafe Wireless Access Point settings are stored in the product family in a
configuration file. This file can be saved (backed up) to a user's computer, retrieved
(restored) from the user's computer, or reset to factory default settings.
The Configuration Backup/Restore Settings menu allows you to save or retrieve a file
containing your product family's configuration settings.

Saving the Configuration

To save your settings:
Select Maintenance > Upgrade > Backup Settings to back up your current
1.
settings.The Backup Settings screen displays. See
Figure 5.
Click Backup. Your browser will extract the configuration file from the product family and
2.
prompt you for a location on your computer to store the file.
Give the file a meaningful name, such as WNAP320.cfg
3.

Restoring the Configuration

To restore your settings from a saved configuration file:
Select Maintenance > Reset > Restore Defaults to restore your settings. The Restore
1.
Defaults screen displays. See
Select No for Restore to factory default settings and then Apply. This displays a dialog
2.
allowing you to select a file where you have previously saved configuration settings.
Enter the full path to the file on your computer or click the Browse button to locate the file.
3.
When you have located the file, click Restore to upload the file. After completing the upload,
4.
the WNAP320 will reboot automatically.
26 | Chapter 3. Management
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Figure 5,
.
Figure 6,
.
and click Save.
,