Led Indicators; Power Failure - D-Link DES-1016 User Manual

10/100 Fast Ethernet Switch User's Guide

LED Indicators

After the switch is turned on, the LED indicators should respond as follows:
♦ All of the LED indicators will blink momentarily. This blinking of
the LED indicators represents a reset of the system.
♦ The power LED indicator will remain ON.

Power Failure

As a precaution, the Switch should be turned OFF in case of a power
failure. Press the power switch to the off or " 0" position. When power is
resumed, turn the Switch ON. At all times, avoid leaving the Switch ON if
a power failure is anticipated.
11
Unpacking and Setup