Table of Contents
Advertisement
3.3.5 FRAME ASSEMBLY UP/DOWN (FIG. 4-4)
Note
Put the Base Main face down (Bottom Side)
(1) Release the screw (S4)
(2) Unlock the Locking Tab (L3) in direction of arrow and then
lift up the Frame Assembly Up/Down to separate it from the
Base Main.
Note
• When reassembling move the Guide Up/Down in direction of
arrow(C) until it is positioned as Fig.(C).
• When reassembling insert (A) portion of the Frame Assem-
bly Up/Down in the (B) portion of the Guide Up/Down as
Fig.(B)
3.3.6 BELT LOADING(FIG. 4-4)
Note
Put the Base Main on original position(Top Side)
3.3.7 GEAR PULLEY (FIG. 4-4)
(1) Unlock the Locking Tab(L4) in direction of arrow(B) and
then separate the Gear Pulley from the Base Main
Fig.4-4
3.3.8 GEAR LOADING (FIG. 4-4)
3.3.9 GUIDE UP/DOWN (FIG. 4-4)
(1) Move the Guide Up/Down in direction of arrow(A) as
Fig.(A)
(2) Push the Locking Tab(L5) down and then lift up the Guide
Up/Down to separate it from the Base Main.
Note
When reassembling place the Guide Up/Down as Fig.(C) and
move it in direction arrow(B) until it is locked by the Locking
Tab(L5). And confirm the Guide Up/Down as Fig.(A)
3.3.10 PWB ASSEMBLY LOADING (FIG. 4-4)
Note
Put the Base Main face down(Bottom Side)
(1) Release 1 Screws(S5)
(2) Unlock the Loading Motor (C2) from the Hook (H1) on the
Base Main.
(3) Unlock 2 Locking Tabs(L6) and separate the PWB Assem-
bly Loading from the Base Main.
3.3.11 BASE MAIN (FIG. 4-4)
(No.YD118)1-11
Advertisement
Table of Contents
