Table of Contents
Advertisement
+
Before connection to a loudspeaker output, always make sure that
the GND LIFT switch is activated (depressed) to prevent accidental
short-circuiting of the amplifier output. The metal casing of the
GI100 should not have direct contact with other equipment. The
tip of the output socket should be connected to the positive (red)
loudspeaker pole.
3.
SPECIFICATIONS
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may therefore differ from those listed or shown.
DATA-MANFULL_GI100_ENG_Rev A.p65
Fig. 2.3: Connection to an amplifier’s output
9
9
07.09.01, 15:43
Advertisement
Table of Contents
