Safety 1st advance EX 65 air+ Instructions Manual page 13

4.
5. Remove Harness Straps from Storage
Pull seat pad panel forward as shown. Pull harness straps
and chest clip pieces out of slots in shell. Put seat pad
panel back into place.
6.
19
Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle MUST not pull out.
Thread Harness Straps
into Shoulder Harness
Slots and Pull Through
Pad and Shell
DO NOT twist harness straps.
7. From Back of Seat,
Attach Harness Strap
Loops to Splitter
Plate As Shown
Sewn ends of the harness strap
loops
DO NOT twist harness straps or
harness adjustment strap.
Make sure the harness strap
loops are fitted COMPLETELY
ON both sides of the splitter
sewn
plate.
end
MUST face towards you.
continued on next page
20