Samsung AC026MNJDKH/EU Service Manual page 27

Take the steps presented in the following table:
1 Set the SEG2 and SEG3 values:
a Set the SEG2 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG3 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
2 Press the (Mode) button. Cool and On appear on the remote control display.
3 Set the SEG4 and SEG5 values:
a Set the SEG4 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG5 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
4 Press the (Mode) button. Dry and On appear on the remote control display.
5 Set the SEG6 and SEG8 values:
a Set the SEG6 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG8 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
4-2
Steps
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
Remote control display
SEG2
SEG3
SEG4
SEG5
SEG6
SEG8
Samsung Electronics