Remote Controller - LG LWC1011ACG Service Manual

2. COOLING ONLY MODEL WITH REMOTE CONTROL AND TOUCH TYPE
• DISPLAY
MODE
• Everytime you push this button, it will toggle
between Cool, Fan and Dry.
ON/OFF TIMER
• Everytime you push this button, timer is set as follows.
(1Hour ¡ 2Hours ¡ 3Hours ¡ 4Hours ¡ 5Hours ¡ 6Hours ¡ 7Hours
¡ 8Hours ¡ 9Hours ¡ 10Hours ¡ 11Hours ¡ 12Hours ¡ Cancel)
• The Setting Temperature will be raised by 2°F(1˚C) 30min.
later and by 2°F after another 30 min.

• Remote controller

Precaution: The Remote Controller will not function properly if strong light strikes the sensor window of the air conditioner or
if there are obstacles between the Remote Controller and the air conditioner.
1 ON/OFF TIMER
- STOPPING OPERATION
• Everytime you push this button, when the air conditioner is operating, timer is set as follows. (1Hour
¡ 2Hours ¡ 3Hours ¡ 4Hours ¡ 5Hours ¡ 6Hours ¡ 7Hours ¡ 8Hours ¡ 9Hours ¡ 10Hours ¡
11Hours ¡ 12Hours ¡ Cancel)
• The Setting Temperature will be raised by 2°F(1°C) 30min. later and by 2°F(1°C) after another 30 min.
- STARTING OPERATION
• Everytime you push this button, when the air conditioner is not operating, timer is set as follow.
(1Hour ¡ 2Hours ¡ 3Hours ¡ 4Hours ¡ 5Hours ¡ 6Hours ¡ 7Hours ¡ 8Hours ¡ 9Hours
10Hours ¡ 11Hours ¡ 12Hours ¡ Cancel)
2 AUTO SWING (Optional)
• The vertical louver swings horizontally by the automatic system and stops when you press
the button again.
3
MODE
• Everytime you push this button, it will toggle between Cool, Fan and Dry.
4
FAN SPEED
• Everytime you push this button it is set as follows. {High(F3) ¡ Low(F1) ¡ Med(F2) ¡ High(F3)...}.
5 TEMPERATURE SETTING
• This button can automatically control the temperature of the room.
The temperature can be set within a range of 60°F to 86°F by 1°F.(16˚C to 30˚C by 1˚C)
Select the lower number for lower temperature of the room.
6
POWER
• To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72°F(22˚C).
REMOCON SIGNAL RECEIVER
AUTO RESTART SWITCH
In failure of electric power, if the switch is set to "ON",
the unit runs unit runs as previous setting operation
when power returns.
POWER
• To turn the air conditioner ON, push the button.
To turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the
High cool mode and the temp. at 72°F(22˚C)
AUTO SWING (Optional)
The vertical louver swings horizontally by the automatic
system and stops when you press the button again.
TEMPERATURE SETTING
• This button can automatically control the temperature
of the room. The temperature can be set within a range
of 60°F to 86°F by 1°F.(16˚C to 30˚C by 1˚C)
Select the lower number for lower temperature of the room.
FAN SPEED
• Everytime you push this button it is set as follows.
{High(F3) ¡ Low(F1) ¡ Med(F2) ¡ High(F3)...}.
—4—
2
3
4
5
5
4
1
1
6
6
3
2