Medley; Transposer; Trouble Shooting Guide - Farfisa KP-100 Instruction Manual

• Medley – The songs are automatically played in succession
The "Medley" function makes it possible to listen to all songs present in a folder or the pieces contained
in a playlist or a set list, one after the other.
How to activate or deactivate the "Medley" function:
FUNCTIONS
1. Press the [ ] button, the TV screen displays the various fun-
ctions;
2. choose the "Medley" option using the
3. choose On or Off using the
FUNCTIONS
4. press the [ ] button to exit;
The Off function is active when switched on.
After setting "Medley On", enter a folder or a "Playlist", select a song,
PLAY
pressing [ ], all songs in the folder or Playlist are automatically played in succession.
It is possible to transpose the song key by pressing the [
buttons.
How to set the "Transposer":

TRANSPOSER

1. Use the [ ]
tes "Transposer +1" , for example, temporarily;
PLAY
2. By pressing [ ], 'two small notes' appear in the top right corner with the set Transposer value.
When another song is played, the Transposer is automatically reset.
PROBLEM
It does not turn on
Sound is absent.
No sound is produced when reproducing MIDI
data from a computer.
When playing the sound reproduced is not natural
when the equipment is connected to a computer.
There is some noise when a mobile phone is
used.
Any other anomalies.
Attention: In order to avoid bothersome feedback (Larsen effect), do not bring the microphone close
to the speaker of the external amplification.
14
[ ]
or
[ ] [ ]
or buttons;
13. TRANSPOSER
+ –
and buttons to set the desired value (from -6 to +6); the TV screen indica-

14. TROUBLE SHOOTING GUIDE

[ ]
buttons;
TRANSPOSER +
POSSIBLE CAUSE AND SOLUTION
A problem with the power supply source.
Correctly connect the network adaptor.
The volume is set too low.
Use MUSIC VOLUME to raise the volume.
The USB-MIDI cable has not been connected correctly.
Properly connect the UBS-MIDI cable. Correctly set
MINI DEVICE.
The MIDI THRU function is active on the computer.
Deactivate the MIDI THRU function on the computer.
Using a mobile phone near the equipment may cause
interference. In order to avoid this problem, deactivate
the mobile phone or use it away from the equipment.
Shut off and turn back on after a few seconds.
TRANSPOSER –
] and [ ]