Connect Power; Get Started; Prepare The Remote Control - Philips MCM103 User Manual

Connect power

Caution
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
Before connecting the AC power cord, ensure
you have completed all other connections.
Note
The type plate is located on the rear of the
main unit.
The voltage selector is at the bottom of the
main unit
1
Switch the voltage selector to the local
power line voltage.
2
Connect the AC power cord to the AC
MAINS~ jack on the main unit and to the
wall socket.
10 EN

4 Get started

Caution
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Prepare the remote control

Caution
Risk of explosion! Keep batteries away from
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.