Page 2: Regulatory Information
˙Do not attempt to disassemble the appliance. Contact qualified service personnel for maintenance. ˙Handle the appliance with care. Do not strike or shake, which may damage the appliance. Notice ˙Information in this document is subject to change without notice. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 3: Table Of Contents
Live Viewing 2.5.1. Basic Operation Search (Playback) Operation 3.1. Playback Basic operation 3.2. Calendar 3.3. Playback operation 3.3.1. Search by Time 3.3.2. Search by Channel 3.3.3. Search by Event 3.4. Playback operation Recording Copyright © 2015 DivioTec Inc. All rights reserved.
Page 4 Service 8.2.2.2. DHCP Server 8.2.3. Network Notification 8.2.3.1. E-Mail Notification 8.3. Alarm Settings 8.3.1. Alarm Input Settings 8.3.2. Exception Management 8.4. System Settings 8.4.1. Device Setting 8.4.2. User Settings 8.4.3. Date/Time Settings Copyright © 2015 DivioTec Inc. All rights reserved.
Page 5 9.4.6 Remote Export 9.4.7 Remote PTZ Control 9.4.8 Remote Snapshot 9.4.9 Remote Digital Zoom 9.4.10 Remote Keep Aspect Ratio Mobile Apps 10.1. Android System 10.1.1. Download DivioEye Android App 10.1.2. Live View Copyright © 2015 DivioTec Inc. All rights reserved.
Page 6 11.7.2.1. Search by Time 11.7.2.2. Search by Channel 11.7.2.3. Search by Event 11.8. CMS Playback Operation 11.9. CMS Export 11.10. Using eMap 11.11. Using PTZ Configuration 11.12. Multiple Monitor Support 11.13. CMS System Copyright © 2015 DivioTec Inc. All rights reserved.
Page 7: Introduction
Support 2 internal SATA HDDs, up to 8TB for 4/8 CH NVR.  Convenient Control of PT cameras: It supports PTZ (Pan/Tilt/Zoom) cameras to adjust directly from the NVR and they can be viewed on the local display. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 8: Product Specification
1; Support Pelco D, Pelco P Security Watermark User Privilege 3 Levels of User Access Support Environmental Power DC 48V, 90W Dimension 319(W) x 53(H) x 297(D) mm ± 5 mm Temperature 0°C ~ 40°C Copyright © 2015 DivioTec Inc. All rights reserved.
Page 9 1; Support Pelco D, Pelco P Security Watermark User Privilege 3 Levels of User Access Support Environmental Power DC 48V, 90W Dimension 319(W) x 53(H) x 297(D) mm ± 5 mm Temperature 0°C ~ 40°C Copyright © 2015 DivioTec Inc. All rights reserved.
Page 10: Front Panel
Record: Rec indicator turns on when NVR is recording. USB Port: USB2.0 port for connecting devices, such as USB mouse or USB flash drive. 5. CH1~CH8: Indicators turn on when the video is connected to the system. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 11: Rear Panel
Connect NVR to Internet via a RJ-45 network cable. LAN 1-4 Connect IP camera to the same LAN as the NVR. Connect IP camera to PoE (Power over Ethernet) ports. Power Plug the DV48V power source into the power socket. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 12 Connect NVR to Internet via a RJ-45 network cable. LAN 1-8 Connect IP camera to the same LAN as the NVR. Connect IP camera to PoE (Power over Ethernet) ports. Power Plug the DV48V power source into the power socket. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 13 Vdc, 500 mA (continuous), or 10 VA on an alarm output relay's contacts. Specifications Switching current (resistive): 500 mA maximum Switching voltage (resistive): 24 VDC maximum Cable cross section: AWG 26-16 (0.13-1.5 mm2) Copyright © 2015 DivioTec Inc. All rights reserved.
Page 14: Packing Detail And Installation
Power cord x 1  SATA connection cable x 2  Hard drive mounting bracket x 4  Screws for mounting bracket x 10  Screws for mounting hard drive x 10 Copyright © 2015 DivioTec Inc. All rights reserved.
Page 15: Hard Disk Installation
Step4. Connect SATA & Power wire to Hard Disk and put it on right position of the case. Use the HDD mounting screws attached in the accessory pack to fix the hard drive with bracket firmly on to the chassis. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 16: General Operation
The functions available can be limited by setting passwords. Access to the unit’s functions is determined by the user level of the user logged in. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 17 Authority Instructions based on 3 levels of users Administrator Operator Guest View live Live Multiple-up Zoom Pan/Tilt/Zoom (PTZ) Playback Export Acknowledge Alarm Configuration Copyright © 2015 DivioTec Inc. All rights reserved.
Page 18: Add Ip Cameras To Nvr
LAN. After few seconds, the NVR will detect the IP cameras and display image. Note The connected IP cameras must be integrated IP cameras for NVR to perform plug and play feature. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 19: Wizard-Manual Install Mode
After finish the device setting, please click Next to the next page. Step 3. User can configure network settings for WAN and LAN. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 20 After finish the network settings, please press Next to the next page. Step 4. User can configure Date/Time settings of the NVR. After finish the Date/Time settings, please press Apply to save user’s changes and proceed to the next step. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 21 NTP On/Off: To enable or disable system NTP synchronization. Step 5. After press Apply button, the NVR will save those parameters and start to scan the LAN environment to search for the specific IP cameras. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 22 Step 6. After NVR gets the specific IP cameras, it will display the IP camera list. User can click Add button to add IP camera into desired channel. Step 7. After adding IP cameras into NVR, NVR will start to configure the parameters of the IP cameras. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 23: Manual Install
IP camera also successfully add into NVR. 2.2.3. Manual Install User can add IP cameras manually in Camera-Settings menu by following the below steps. Step 1. Please click Manual Install button to add IP camera. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 24 In order to add IP camera successfully to NVR, NVR manage port number must be the same as IP camera http port number. Step 3. When the IP camera is installed successfully, NVR will pop up the success message. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 25: Ip Camera Discovery
After NVR finish scanning, user will see the list of every connected IP cameras with its detailed information, MAC address and connection status to the NVR. User can add the IP camera into the desired channel. 2.2.5. Manually Add Camera by Stream Server Copyright © 2015 DivioTec Inc. All rights reserved.
Page 26: Manually Add Onvif Ip Camera
ONVIF, input ONVIF IP camera’s IP address, manage port number, user name and password. Click Probe to search this specific IP camera to add IP camera into NVR. 2.3. Edit cameras Click to edit cameras. Configure the connection and video profile information as needed. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 28: Live Viewing
(4) To switch channel in the display window, move the focus channel to the selected window, click on the channel button user wish to display, the channel will be switched. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 29 Right click on the mouse to drag on the screen to zoom in the selected area. Click to bring up the PTZ control panel Click to Logout from the current user’s privilege. (D) Current date time: It indicates the current system time. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 30: Search (Playback) Operation
Right click on the mouse to drag on the screen to zoom in the selected area. Click to switch to live view mode Show/Hide OSD Note Click the display icons to playback multiple channels simultaneously. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 31: Calendar
Each file contains maximum 60 minutes of the video. Select the time range user would like to view and double click the item to start to play on the display window. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 33: Playback Operation
Click to switch to fast reverse playback, use to adjust playback speed, in x1, x2, and x4 and x8. Pause the video and click the button to step reverse playback. Click to fast backward to the previous section Recording Copyright © 2015 DivioTec Inc. All rights reserved.
Page 34: Schedule Recording Settings
Click CH Copy to allow user to copy the settings of the whole week from one channel to other channels. Click Apply to save the changes. 4.2. Record Settings In the Camera-Record sub menu, user can define the recording behavior in the record Copyright © 2015 DivioTec Inc. All rights reserved.
Page 35 Pre-event – Set the pre-event recoding duration. The maximum pre-recording duration is 5 seconds.  Post-event – Set the post-event recording duration. Click Apply to save the settings. Click Copy to copy the settings to other channels. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 36: Ptz Control
Set: To save the current PTZ position as it’s internal preset position.  Go: Go to the preset position  Quick Preset 1–10 : The quick button to go to the preset positions. Export(Backup) Video Copyright © 2015 DivioTec Inc. All rights reserved.
Page 37: Export Video
User can view the exported video by the Export Player. Click Export Player to download to the USB drive if the user does not have the Player installed. To playback the exported file by using the steps in Chapter 7 export player. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 38: Export Player
Click Export Player button and the system will automatically store the Player in the pen drive. 7.2. Starting the Player Program and Viewing exported video file Double click on the Player.exe file to start the program. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 39 Right click on the mouse to drag on the screen to zoom in the selected area. Click to take a snapshot of the selected video. Click watermark icon to verify the video is authentic or not. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 40 When audio is on, the user can move the focus window to the select the channel that would like to play. Click to convert the video file of the selected channel to AVI format. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 41: Main Menu Operations
By default, the user name is admin and the password is admin. 8.1. Camera The camera setup menu allows user to configure the behaviors related to the input video of IP cameras. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 42: Camera Settings
In the Camera-Settings sub menu, it displays the current IP camera information, including camera title, IP address, Auto-IP address and IP camera connecting status. Click on the for detailed setup of each IP camera. Click on the to delete IP camera. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 43: Camera Basic Setting
Stream Profiles – There are different stream profiles of the IP camera. User can select the desired stream profile as the recorded main profile and sub profile. Click Apply to save the changes. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 44: Camera Advanced Setting
IP cameras from the NVR. User can adjust video brightness, contrast, saturation, sharpness, mirror and flip of the IP cameras. Press Restore to back to the last parameter settings. Press Exit to back the previous page. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 45: Video Loss Handle Settings
Triggered Camera – The system allows user to trigger multiple cameras for event recording, select the cameras that would like to be triggered when video loss is detected. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 46: Motion Handle Settings
Triggered Camera – The system allows user to trigger multiple cameras for event recording. Select the cameras that would like to be triggered when motion is detected. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 47: Ptz Settings
Stop Bit - This field is to set the stop bit for the RS485 connection. This can be set to 1 or 2.  Address - The address must set to the same address of RS485 PTZ camera. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 48: Network
2. HTTP Port No.: It is used to enable the system connection of Web Viewer. The default port number is 80. 3. RTSP Port: It is used for specific application. The default port number is 554. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 49: Lan Settings
The NVR provides the options for DHCP or Fixed IP in LAN environment. Select the option user would like to use to enable and configure the settings. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 50: Ddns
NVR to internet without problem. Or users probably use the same domain name as others’ so please use another domain name to register DDNS account to ensure the registration Copyright © 2015 DivioTec Inc. All rights reserved.
Page 52: Network Service
UPnP: User can enable or disable UPnP on NVR. After enabled, the NVR connects to a network and NVR automatically establishes working configurations with other devices. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 53: Dhcp Server
 After enable DHCP Server, NVR is able to assign IP address to IP camera in the LAN environment. The range is from 0 ~ 255. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 54: Network Notification
User name / Password – Input the login user name and password if the SMTP Server requires authentication.  Send test mail – Click to send the test email according to the current settings. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 55: Alarm Settings
Triggered Camera – The system allows user to trigger multiple cameras for event recording, select the cameras that would like to be triggered when alarm is detected. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 56: Exception Management
Trigger Alarm Out – Select the Alarm out to trigger when the exceptional events occur.  Send Email – Select On to send Email when the exceptional events occur. For detailed e-mail notification settings, please refer to 8.2.3.1 for E-Mail Notification. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 57: System Settings
LAN environment, NVR will automatically add the IP camera into NVR when there is still spare channel existing in the NVR.  Install Wizard – Click “Go” to bring up Install Wizard menu. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 58: User Settings
 Click on to add new user. Authority Instructions based on 3 levels of users Administrator Operator Guest View live Live Multiple-up Zoom Pan/Tilt/Zoom (PTZ) Playback Export Acknowledge Alarm Configuration Copyright © 2015 DivioTec Inc. All rights reserved.
Page 59: Date/Time Settings
Time Zone – Set the time zone that the NVR adjusts to when updating from the time server.  Date Format – Select date format from DD/MM/YYYY, MM/DD/YYYY or YYYY/MM/DD.  Time Format – Select time format between 12 Hours and 24 Hours. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 60: Dst Settings (Daylight Saving Time)
DST Bias – This allows users to select the amount of time to move forward from the standard time for daylight saving time. Available options are 30, 45, 60, 90 and 120 minutes Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 61: Ntp Client Settings
4. NTP Server – Input the time server address for time synchronization. The default NTP server is “pool.ntp.org”. 5. NTP Port – The default setting is “123”, user can enter NTP server port number. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 62: Display
Monitor Resolution –Select Auto for system to identify resolution automatically for connected HDMI and VGA monitors. The supported resolutions are: 1920x1080, 1440x900, 1366x768, 1280x1024,1024x768. User also can select the display resolution manually. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 63: Main Monitor Settings
 Sequence enabled – Select On to enable sequence display on main monitor.  Dwell – Input the dwell time in seconds for sequence display.  Camera – Select the cameras to be appeared on the sequence display. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 64: Hdd
Overwrite – Select On to enable hard disk overwrite when it’s full.  Auto delete – The hard disk will automatically erase the data after the selected number of days. Select “0” to disable the function. Click Apply to save the settings. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 65: Hdd Management
Click Format to format the selected hard disk.  HDD quantities support might vary according to different NVR models. ! Caution Format the hard disk will erase all existing data on the hard disk! Copyright © 2015 DivioTec Inc. All rights reserved.
Page 66: Miscellaneous
The system reboot is required to complete the firmware upgrade. ! Caution Do not disconnect USB device or turn off the NVR power during the upgrading firmware otherwise it might cause NVR defective. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 67: Restore Factory Default And Use Configuration
Import Configuration – Click “Load from USB” button to upload NVR configuration settings from a USB flash device.  Export Configuration – Click “Save to USB” to save the current NVR configuration settings to a USB flash device. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 68: Information
In the Information-Information menu, it displays the general system information. The information includes model name, firmware version, serial number, WAN IP address, WAN MAC Address, LAN IP address and LAN MAC address. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 69: Log
Export user would like to review and to show in the event log. The filtered log will be displayed in the page.  Click Save to USB with a USB flash device connected to the unit, the filtered log will be saved to the USB device. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 71: Remote Live View
Click Login to enter the web viewer. The user name/password are the same as the NVR login, the defaults are: Note Administrator user name/password: admin/admin Operator user name/password: operator/operator Guest user name/password: guest/guest Remote Live View Copyright © 2015 DivioTec Inc. All rights reserved.
Page 72 Click to switch to Export mode Click to enable the PTZ control panel Click to Logout from the current user’s privilege. 1x1 display mode Click to first 2x2 or second 2x2 display mode Copyright © 2015 DivioTec Inc. All rights reserved.
Page 73 For remote snapshot, please disable the protected mode in the IE browser. Please follow the below 2 steps to ensure the remote snapshot perform normally. Step 1. Please click IE browser Tools-Internet Options. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 74: Remote Search And Playback
Remote Search and Playback Click the Playback button to switch to playback mode. The video can be searched by Time, Channel and Event, select the search type to start searching. 9.4.1 Search by Time Copyright © 2015 DivioTec Inc. All rights reserved.
Page 75: Search By Channel
The event video list of the selected channel will be shown on the screen. ** Double click on the selected recorded file to start the playback. 9.4.3 Search by Event Copyright © 2015 DivioTec Inc. All rights reserved.
Page 76: Web Viewer Playback Operation
The progress bar shows the current playback status and timeline. Drag the time indicator on the progress bar to move to the selected timeline to playback. On the time bar, it also indicates the initial and end time of the current playback section. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 77: Web Viewer Setup Menu
User can configure all the NVR settings remotely through the web viewer. The setup menu operation is the same as in the NVR. Please refer to the Chapter 8 Main Menu Operations. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 78: Remote Export
2000MB. ** Double click on the selected item and the system will pop up message as below, select the location user would like to store then click Save to execute the downloading. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 79: Remote Ptz Control
PTZ control panel. This allows user to control the connected PTZ camera. The basic operation is the same as the NVR PTZ control. Please refer to Chapter 5 PTZ Control for detail operation. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 80: Remote Snapshot
9.4.8 Remote Snapshot Click the Snapshot button in live mode or playback mode to store the current image as a still image and save in the PC folder. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 81: Remote Digital Zoom
8x in live mode or in playback mode. Move the focus to the selected video. Click Full Screen button first and then click Digital Zoom icon and the selected area which user would like to enlarge. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 82: Remote Keep Aspect Ratio
9.4.10 Remote Keep Aspect Ratio Click Keep Aspect Ratio icon to allow user to keep the image aspect ratio as 4:3 or 16:9 without distortion. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 83: Mobile Apps
Step2. Search for DivioEye App, tap Install, the system will pop-up the menu for user to Accept & download the App. The download should then begin. The DivioEye icon will show on the device after the download is completed. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 85: Live View
10.1.2. Live View Tap on the NVR that user would like to open the view window. Rotate the screen, the orientation of the screen rotates with the tablet as user turn it. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 86 /up left /down right / down left. : Tap to Zoom in or Zoom out : To adjust focus to near or far : To adjust Iris to open or close : Tap to go to Home position. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 88: Playback Mode
Tap on Snapshot icon to store the current image as a still image and save in the device folder. 10.1.3. Playback Mode User is able to playback the recorded data by using the Android devices. Step 1. Tap Playback Copyright © 2015 DivioTec Inc. All rights reserved.
Page 90 The zoom in/out display ratio will be shown on the screen. (from 0.2X to 25X) Tap on Snapshot icon to store the current image as a still image and save in the device folder. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 91: Ios System
Step2. Search for DivioEye App, tap on “Install APP”, the system will pop-up the request for user to enter login password to start downloading. The downloading should then begin. The DivioEye icon will show on the device after the download is completed. Step3. Run “DivioEye” Copyright © 2015 DivioTec Inc. All rights reserved.
Page 92: Live View
Step5. Input NVR name, Host (IP Address), Port, User name and Password. Tap on “Save” to activate the settings. 10.2.2. Live View Tap on the NVR that user would like to open the view window. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 93 /up left /down right / down left. : Tap to Zoom in or Zoom out : To adjust focus to near or far : To adjust Iris to open or close : Tap to go to Home position. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 94  Preset: Tap on to bring up the preset menu for operations. Others To enable/disable audio display Under full screen mode, tap on the icon to enable the digital zoom function. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 95 The zoom in/out display ratio will be shown on the screen. (from 0.2X to 25X) Tap on Snapshot icon to store the current image as a still image and save in the device folder. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 96: Playback Mode
10.2.3. Playback Mode User is able to playback the recorded data by using the Apple devices. Step 1. Tap Playback Step 2. Select the start and end times and press Done to playback. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 97 The zoom in/out display ratio will be shown on the screen. (from 0.2X to 25X) Tap on Snapshot icon to store the current image as a still image and save in the device folder. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 98: Cms Pro (Central Management Software)
The CMS Pro installer is in multi-language. User can choose the installer language. If user’s software is without .NET Framework 4.0, the CMS Pro installer will require user to install .NET Framework 4.0 to ensure CMS operation. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 99 After click yes, there will pop up the installation progress bar to indicate the progress. The .NET Framework 4.0 installer will ask user to review the license terms. After user accept the license terms, please click Install to proceed further. Please click Next to proceed further. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 101 Once .NET Framework 4.0 software install successfully, it will pop up the below complete message. Then user can begin to install CMS Pro software. Once the .NET Framework 4.0 install successfully, user can begin the installation by clicking Next. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 102 The CMS Pro installer will install the program in a default directory. User can either accept the default or choose the directory user would like to save the installer. And click Install to proceed with the installation. The CMS Pro installer will show the installation process. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 103: Start Cms Pro From The Pc
Once the installation is complete, click Finish to exit the CMS Pro installer. 11.2. Start CMS Pro from the PC The program automatically creates a shortcut icon on user’s PC after CMS Pro install successfully. Simply double click the icon to launch the program. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 104: Cms Pro Ui Overview
(F) Playback: Once user presses the playback, it will launch playback control UI to have the further operations. (G) Video: This is where the video is displayed. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 105: Login
By default, the administrator’s user name is admin and password is admin. The program provides multi-language support. To change the display language, please select the desired language from the CMS language drop-down menu. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 106: Add Nvrs To Cms Pro
Password. The http port default value is 80 and user is able to modify the http port based on NVR WAN setting. Please refer to 8.2.1.1 WAN setting. Please note user need to use the CMS Pro administrator’s user name and password of the selected device. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 107: Remove Or Edit Or Configure Device Setting
Open in web browser-By click Open in web browser, user is able to access the device’s web viewer to configure this device.  Reboot system- User can click this button to reboot the specific device. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 108: Cms Pro Group Video
Click the mouse left button on Add Group and the default “Group 1” will be generated. The group number is increased by numerical order. Click the mouse right button on “Group 1” and user can configure Open Group Stream, Edit Group Name or Delete Group. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 109: Edit Group Content
11.5.3.3. Edit Group Name User can modify the group name. 11.5.3.4. Delete Group User can remove the group from the group list by clicking on the mouse right button on the selected group. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 110: Live Video
Quad display mode 9-up screen display mode 16-up screen display mode 25-up screen display mode 36-up screen display mode Click to Logout from the current page Click to turn on/off live audio Copyright © 2015 DivioTec Inc. All rights reserved.
Page 111 Move the focus to the selected video. Then click Digital Zoom icon and the selected area which user would like to enlarge. This function also can work in 1-up , 4-up , 9-up and 16-up screen display mode. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 113: Playback Video
The basic operations are showing on the main screen, the functions are: Full screen display mode Quad display mode 9-up screen display mode 16-up screen display mode 25-up screen display mode 36-up screen display mode Click to turn on/off recorded audio Show/Hide OSD Copyright © 2015 DivioTec Inc. All rights reserved.
Page 114: Search For Playback Video
11.7.1. Search for Playback Videos Simply select a device from the drop-down device list and double click the selected device. It will pop up the calendar. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 115: Calendar
Double click on the selected file then the video will start to play on the display window. 11.7.2.1. Search by Time The recorded section list of the current selected day will be shown on the screen. Double click on the selected recorded file to start the playback. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 116: Search By Channel
(Alarm, Motion and Video Loss), the event video list of the selected channel and event type will be shown on the screen. Double click on the selected recorded file to start the playback. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 117: Cms Playback Operation
Click to switch to fast forward playback (2x), user can also control the playback speed by clicking , in x0.25, x0.5, x1, x2, x4 and x8. Click to fast forward to the next section Click to fast backward to the previous section Copyright © 2015 DivioTec Inc. All rights reserved.
Page 118: Cms Export
2000MB. ** Double click on the selected item and the system will pop up message as below, select the location user would like to store then click Save to execute the downloading. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 119: Using Emap
NVRs on the same eMap. If user is unable to get the eMap function, please upgrade the later CMS Pro version to get this function. Click eMap button to bring up the eMap screen. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 120 ** To bring in a PNG or JPG image, click on the Loading picture button. Once you click on the “Loading picture” button, you will get a screen shown as below and select the desired image. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 121 User is able to create maximum 8 different images once. Select the number in user configuration first and then click on the Loading picture to import the image. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 123 Double click on the selected video to show in full screen. Click on icon and all images will be closed. Click the Camera Title icon to show the camera name. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 124 Click on the button to show the camera titles of different cameras shown as below. Click on the button to enable the audio of the selected camera. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 125 Then click on the icon to take the snapshot of the selected camera. User is able to choose the desired directory of the PC to save the image. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 126: Using Ptz Configuration
If the system is not as suggested specifications, user will experience the slow performance of the multiple monitor support. Minimum PC System Requirement  CPU : Minimum Intel i5 or higher  RAM: Minimum 6GB of RAM  Independent Graphic Card: Minimum 1GB Copyright © 2015 DivioTec Inc. All rights reserved.
Page 127: Cms System
After confirmation, click Edit, the new password has been updated. The new password will be required when next time user login again. Copyright © 2015 DivioTec Inc. All rights reserved.
Page 128 After finish the correction, user is able to control the directions of the PTZ camera by joystick.  CMS Version: It indicates CMS Pro current version. Copyright © 2015 DivioTec Inc. All rights reserved.

DivioTec SRA212N-004P4 User Manual

1 Introduction

2 General Operation

Live Viewing Basic Operation

3 Search (Playback) Operation

5 PTZ Control

6 Export(Backup) Video

7 Export Player

8 Main Menu Operations

9 Web Viewer Operation

Mobile Apps

11 CMS Pro (Central Management Software)

Quick Links

User Manual

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for DivioTec SRA212N-004P4

Summary of Contents for DivioTec SRA212N-004P4

Table of Contents