Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DPM PosiTector
Summary of Contents for DPM PosiTector
- Page 1 ® PosiTector Dew Point Meter Quick Guide v. 3.1...
- Page 2 - Surface minus Dew Point Temperature (calculated) - Wet Bulb Temperature (calculated) (Advanced Models Only) The PosiTector DPM powers-up when the center navigation button is pressed. Readings are updated automatically each second. To preserve battery life, the instrument powers down after approximately 5 minutes of no activity.
-
Page 3: Alarm Mode
Alarm Mode Alarm Mode Alarm The PosiTector DPM can automatically alert the user when current climatic conditions exceed pre-set values. When selected, the Alarm icon is displayed at the top of the screen. Standard models will alert the user when the surface temperature is less than 3°C (5°F) above the dew point... - Page 4 - Bluetooth Pairing info is cleared. - Alarm values are set to default. - Menu settings are returned to the following: Units = Celsius Language = English Flip Display = Normal Battery Type = Alkaline Auto Sync = OFF Backlight = Normal Alarms = OFF Auto Log Interval = 5 min Alarm Sound = OFF...
-
Page 5: Memory Management
Memory Management Memory Management Memory The PosiTector DPM can record datasets in memory for printing to the optional Bluetooth wireless printer, transferring to a computer or synchronizing with PosiTector.net. Readings are time- stamped as they are taken. Datasets can be stored manually (using the (+) button), or automatically using the Auto Log mode (pg. -
Page 6: Auto Log Mode
At each interval, the instrument will wake up, take a reading, sync to PosiTector.net (if configured) and power down. The instrument can record approximately 8,000 datasets while in this mode using fresh alkaline batteries, or approximately one reading every hour for eight months. -
Page 7: Connect Menu
The PosiTector DPM can record datasets in memory for printing, transfer to a computer or synchronizing with PosiTector.net. USB mass storage - connect your PosiTector to a PC/Mac using the suppled USB cable to access and print stored readings and graphs. -
Page 8: Returning For Service
PosiTector Desktop Manager (PDM) or with the optional Bluetooth wireless printer. Updates Determines if a software update is available for your instrument (must be connected to an internet connected PC with PosiTector Desktop Manager). See: www.defelsko.com/update Returning for Service Returning for Service Before returning the instrument for service…... -
Page 9: Technical Data
DeFelsko Corporation. DeFelsko and PosiTector are trademarks of DeFelsko Corporation registered in the U.S. and in other countries. Other brand or product names are trademarks or registered trademarks of their respective holders.
Need help?
Do you have a question about the PosiTector and is the answer not in the manual?
Questions and answers