Page 2
ADN-01 Wireless Audio Adapter (PD70X wireless earpiece and the radio is within series) 10 meters during operation. ADN-02 Wireless Audio Adapter (PD60X ● Only use the wireless earpiece if traffic series) conditions permit safe use and check ESW01 Wireless Earpiece...
Wireless Audio Adapter Owner’s Manual Function Overview This exquisite, easy-wearing and low- powered wireless kit is applicable to Hytera portable radios with firmware version of 5.05 and above. With Hands-free function, you can have convenient and safe communication within a...
Specification by the Company to ensure the optimal operation duration of the Talk Time >4 hours radio. D u s t/Wa t e r IP54 ● Charging the wireless earpiece will not affect the radio operation. P r o t e c t i o n If the earpiece is idle for a long ●...
1. Connect the 3. Turn on the radio. Caution: The wireless earpiece can be wireless audio charged only when the radio is powered adapter to the radio and secure Pairing with and the screw to fasten it. Connecting to the Adapter Before initial use, the wireless earpiece needs to be paired with and connected to the adapter automatically.
Page 8
1. Disconnect the wireless earpiece from When there is a wireless ring PTT » other devices (excluding wireless ring available for pairing and connection PTT). a n d i t i s p a i r e d a n d c o n n e c t e d 2.
Page 9
Manual Pairing and Connection earpiece and wireless audio adapter after the connection is completed, please see Scenario One sub-step 2 of Step 4 in Auto Pairing and When the wireless earpiece is not connected Connection. to the adapter for initial use, the wireless Scenario Two earpiece needs to be paired with and When the wireless earpiece is paired with...
key of the wireless earpiece and the + key and – key of the wireless ring P T T u n t i l t h e L E D i n d i c a t o r o f t h e wireless earpiece flashes red and blue alternatively and the LED indicator of the wireless ring PTT glows blue to enter the...
● Automatic power-on: When attached release the PTT/ Multi-functional key when t o t h e r a d i o v i a t h e a d a p t e r, t h e the LED indicator glows red. wireless earpiece will be powered on automatically when the radio is turned ●...
LED Indication LED Indication Wireless Earpiece Status Adapter Status The LED indicator flashes red and Pairing Pairing blue alternatively. The LED indicator glows red. ● Transmitting Transmitting ● Charging The LED indicator flashes red. Low battery power The LED indicator flashes blue Connected with no voice Connected with no voice twice rapidly.
Troubleshooting Phenomena Analysis Solution The LED indicator does not glow The battery power of the Charge the wireless earpiece red while the wireless earpiece is wireless earpiece may run for 10 to 20 minutes. being charged. out completely. The wireless earpiece cannot pair The wireless earpiece or the Move away from other with the adapter.
Page 14
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation...
Page 15
(2) This device must accept any interference, including interference that may cause undesired operation of the Device. The device compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Need help?
Do you have a question about the ADN-02 and is the answer not in the manual?
Questions and answers