VWR 97043-930 Instruction Manual page 22

Operating Your Cleaner with Ultrasonic, Heating & Degassing Feature
MODEL:
97043-930, 97043-932, 97043-934, 97043-936, 97043-938, 97043-940, 97043-942
97043-944, 97043-946, 97043-948, 97043-950, 97043-952, 97043-954, 97043-956
Power
Indicator
Explanation of controls:
1. Plug in the power and the Power Indicator will flash.
2. Switch on the power and the Power Indicator will be off. The Timing Display
shows the default ultrasonic timing of 15 minutes and the Temperature Display
shows real time temperature of the bath. If it is not necessary to adjust these timing,
press the SONICS key to start operation.
POWER
SONICS HEAT
ON/OFF ON/OFF
①
②
3. Users can use MODE key and Adjust key to change timing, temperature and
degassing setup. The range of timing setup is 1~ 99 minutes and temperature setup
is 20 ~ 69°C
 Change Ultrasonic Timing Setup
Press MODE key till number on the timing screen flashes. Press the Adjust
key to change timing. Turn on the SONICS key thereafter to start ultrasonic.
Press the Adjust key for over 2 seconds, the number on the screen will change
rapidly. After the set time is expired, there will be a 6 buzz notification.
Timing Display
Timing Display
POWER
SONICS HEAT
ON/OFF ON/OFF
DEGAS
HEATING
MODE
min
℃
DEGAS
ENTER / ESC
Temperature Display
HEATING
min ºC
DEGAS
ENTER / ESC
"Adjust / Confirm Degassing" Key
STEP:
① Press the
② Press the
ultrasonic
20
Degassing
Indicator
DEGAS
Heating
Indicator
MODE
key
SONICS
key to start
ON/OFF