Replacing Fuses - Alfa Romeo Giulia Owner's Handbook Manual

143
pull out the bulb-bulb holder unit from
the headlight body by turning it
anticlockwise fig. 144;
144
remove the bulb by sliding it off the
bulb holder
install the new bulb, making sure it is
correctly inserted in the bulb holder;
then insert the bulb, bulb holder and
connector assembly in the housing on the
headlight body and turn it clockwise,
making sure that it is locked correctly;
refit the cover by tightening the two
fixing screws.
Front light cluster with main
beam/dipped beam Xenon gas
discharge headlights
To replace the bulbs of the main beam
headlights/dipped headlights contact an
Alfa Romeo Dealership
08026S0021EM
WARNING
127) Before replacing the bulb, wait for the
exhaust ducts to cool down: DANGER OF
SCALDING!
128) Modifications or repairs to the electric
system that are not carried out properly or
do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
129) Halogen bulbs contain pressurised gas,
in the case of breakage they may burst
causing glass fragments to be projected
outwards.
IMPORTANT
08026S0022EM
58) Halogen bulbs must be handled holding
the metallic part only. Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan of
the bulb. In the event of accidental contact,
wipe the bulb with a cloth moistened with
alcohol and let the bulb dry.

REPLACING FUSES

INTRODUCTION
130) 131) 132) 133) 134)
59) 60)
Fuses protect the electrical system: they
intervene (blow) in the event of a failure
or improper action on the system.
Fuse extracting pliers
To replace a fuse, use the pliers hooked
to the boot fusebox cover fig. 145.
Grab the pliers from the upper tabs,
press them and extract the pliers pulling
upwards.
145
08036S0053EM
141