Philips HTS3565 Quick Start Manual page 2

1 Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the centre speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one metre
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at the back or beside the
listening position.
B Connect the main unit to TV
Television (rear)
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
Main Unit (rear)
Use the supplied composite video cable to connect
the CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note If your TV supports HDMI, connect this unit
to your TV using HDMI connection for better picture
quality. See the accompanying user manual for more
information.
hts3565_98_qsg_eng5_final808.ind2 2 hts3565_98_qsg_eng5_final808.ind2 2
C Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
FRONT CENTER
SUBWOOFER
REAR REAR
FRONT FRONT
RIGHT LEFT
RIGHT LEFT
Main Unit (rear)
D Connect the radio antenna and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
FM antenna
B
Main Unit (rear)
A
Connect the FM antenna to the inner pin of the FM
75 socket. (For some models, it has been
connected in the factory.) Extend the wire for
optimum reception.
B
Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX sockets on the main unit to the AUDIO OUT
sockets on your TV.
AUDIO
OUT
AUDIO OUT
AUDIO
OUT
AUDIO IN
Television (rear)
Main Unit (rear)
Note When watching the TV programs, you can
press AUX (MP3 LINK) repeatedly on the remote
control until 'AUX 1' or "AUX 2' is displayed to get
the sound output from the speakers.
2 Set up
A Finding the viewing channel
Press 2 (Standby-On) on the main unit to turn it
A
on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Standby button
Main Unit (Front)
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT, button) until
you see the Video In channel.
B
Select the display language on the
screen
A
Press OPTIONS.
The { General Setup } appears.
B
Press .
General Setup
Auto
Disc Lock
Display Dim English
OSD Language
Screen Saver
Sleep Malayu
DivX(R) VOD Code
Press OPTIONS to exit menu
C
Use keys to select { OSD Language } and press
.
D
Use keys to select a language option in the
menu and press OK to confirm.
E
Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theatre
System. Refer to the user manual for more information.
2008-02-19 2:45:27 PM 2008-02-19 2:45:27 PM