A2Dp/ Avrcp Services - HandHeld NAUTIZ X3 User Manual

Hide thumbs Also See for NAUTIZ X3:
Table of Contents

Advertisement

Synchronization will automatically initiate and ActiveSync icon will appear at the bottom of the
right corner on the Home Screen.
If certification is required, a password window will appear, then enter a password (PIN code)
and press Enter and repeat this procedure on the other device. The use of password is
recommended for enhanced security and the digit of a password should be between 1 to 16
characters combined with English letters and numbers. If you are not going to use a password,
just click Next.
9. To disengage the ActiveSync connection, select ActiveSync icon on the Home Screen and
click Disconnect.

A2DP/ AVRCP Services

A2DP/ AVRCP are used for connecting to high-quality stereo headsets.
1. Activate Bluetooth on the both device and set the Bluetooth device into detection and
connection mode.
2. Check the distance between two devices is within 10 m (30 ft).
3. Tap Add a Device after selecting Start > Settings > Connections > Bluetooth. NAUTIZ X3 will
start to search for a new Bluetooth device within the range.
4. Select the stereo headset from the list and tap Next. A screen asking a password will appear.
For further information, refer to user's manual of the device.
Note: If smart synchronization is pre-configured and a pre-defined PIN is requested, the
password screen will not appear.
5. Tapping Connection will pair NAUTIZ X3 with the stereo headset.
The stereo headset applicable to hands-free service will be connected to the hands-free service
after being connected to A3DP service.
1. Tap Add a Device after choosing Start > Settings > Connections > Bluetooth. NAUTIZ X3 will
begin to search for a new Bluetooth device within range.
2. Select the stereo headset in the list. Tapping Next will take you to a password window. For
more details, refer to the user's manual of the device.
Note: If smart synchronization is pre-configured and a pre-defined PIN is requested, that
password screen will not appear.
3. Tap Connection. NAUTIZ X3 will be paired with the stereo headset.
71

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents