Power States Of Bluetooth - HandHeld NAUTIZ X3 User Manual

Power states of Bluetooth

Hard reset
Using Microsoft Bluetooth Stack
- If you perform a hard reset, the Bluetooth wireless condition before hard reset remains.
Soft reset
Using Microsoft Bluetooth Stack
- If you perform a soft reset, the Bluetooth wireless condition before hard reset remains.
Pause
- If there is an active Bluetooth paring, the Bluetooth wireless connection enters low-power
consumption mode to maintain the active paring. If there is no active pairing, the Bluetooth
wireless connection will be disconnected.
Using Microsoft Bluetooth Stack
Note: Under the condition that the Bluetooth pairing between NAUTIZ X3 and other Bluetooth
device is active, if there is no data exchange between the devices, NAUTIZ X3 will be timed out.
However, once the power button of NAUTIZ X3 is pressed, NAUTIZ X3 will be temporarily
suspended (except for the case of making a call), and NAUTIZ X3 will be awake from the
suspend mode right after receiving data from the Bluetooth device. For example, if redialing is
made from a headset, the suspension will be disengaged.
Restart
- If Bluetooth was on before temporary suspension, it will be powered on when NAUTIZ X3
restarts.
Using Microsoft Bluetooth Stack
In the next chapter, how to use Microsoft Bluetooth Stack will be explained.
Turning on or off the Bluetooth Wireless mode
- Turn off Bluetooth wireless connection to save battery or when you enter an area where
wireless connection is restricted (e.g. aircraft). When wireless connection is turned off, no other
Bluetooth devices can detect or connect to NAUTIZ X3. To exchange information with other
Bluetooth devices within the operation range, turn on the Bluetooth wireless connection. The
communication using Bluetooth wireless connection is only available within the close distance.
64